Jump to content
SAU Community

Recommended Posts

A catback is better bang for your buck (costs about the same as a set of extractors, but is easier to install).

In an ideal world you'd do the entire exhaust system (extractors, cats, midpipes, rear muffler) for your gains.

The extractors on my car are nasty, but the catback still made a noticable increase in power. When I can, I'll probably replace the extractors and cats as well.

Link to comment
https://www.sau.com.au/forums/topic/95776-na-mods/page/2/#findComment-1747977
Share on other sites

you can't put aftermarket extractors and leave the cat and exhaust alone... that's just a waste of time and effort.

However you can change the cat and exhaust and leave the extractors alone and still get some performance gains.

if that makes sense.

Link to comment
https://www.sau.com.au/forums/topic/95776-na-mods/page/2/#findComment-1748039
Share on other sites

you can't put aftermarket extractors and leave the cat and exhaust alone... that's just a waste of time and effort.

However you can change the cat and exhaust and leave the extractors alone and still get some performance gains.

if that makes sense.

Would it be illegal if i modified my GTS with extractors? ( I'm on my P's and im in NSW)

Also could anyone point me in the right direction of finding a legal exhaust system? (size, manufacturer etc)

Appreciate it :D

Link to comment
https://www.sau.com.au/forums/topic/95776-na-mods/page/2/#findComment-1750550
Share on other sites

local RTA is the only people that can answer that question 100%. Unless the extractors are all bling bling, you'll never get picked up on them by the cops anyways. You have a better chance of being picked up for a louder exhaust than aftermarket extractors, so make sure your exhaust is quiet (mufflers/resonators) and you should fly under the radar.

Link to comment
https://www.sau.com.au/forums/topic/95776-na-mods/page/2/#findComment-1750572
Share on other sites

P platers aren't allowed to have any engine performance modifications. So even if the extractors only give 0.1kw they are considered illegal for a p plater.

As funkymonkey said, if they are fairly quiet cops probably won't notice them. However if they do notice them and decide to give you a fine, I believe you lose something like 7 demerit points for driving a prohibited car (as it is modified). This would mean loss of license for a p plater as you only have 4 points. You would have to get an absolute arsehole of a cop to give you this fine for just having extractors, but it is possible.

So IMO its not really worth the risk.

Link to comment
https://www.sau.com.au/forums/topic/95776-na-mods/page/2/#findComment-1750630
Share on other sites

ok people I have the 1 million dollar question...

Where (on gods good earth) can you get a set of extractors (3") for a R33 GTS?

No one likes dealing with imports, let alone Skylines.

yep frustrating isnt it !!!

try COBY brand .

they are in NEW ZEALAND and do mail order . look in

www.partsco.com

price is au $ 287.53 plus freight

Edited by dondesoto
Link to comment
https://www.sau.com.au/forums/topic/95776-na-mods/page/2/#findComment-1750831
Share on other sites

yeah coby extractors are good. i have them on my gts and you do feel the power gain. they do look stock. especially if you dont heat wrap them. the bright orange paint peals off like straight away haha

all i can say is it must suck to live in aussy :wacko:

NZ's got the mintest car laws. BOVs are legal, no cat needed, no real noise law, no power law thingy. its not perfect but its so much better then your laws

Edited by BADR33
Link to comment
https://www.sau.com.au/forums/topic/95776-na-mods/page/2/#findComment-1752143
Share on other sites

wtf i thought the vic p plater rules were shit with our restrictions n shit but not even being aloud modify your car, n loosing your licence if u do thats f..ked mind the language, what happens if your driving a mates car ause they decided to drink n they were off there p's?? are the cops arseholes like they are in melb, grrr Petit pulled me over the other day, luckly got away with only an epa

Link to comment
https://www.sau.com.au/forums/topic/95776-na-mods/page/2/#findComment-1752494
Share on other sites

but not even being aloud modify your car, n loosing your licence if u do thats f..ked

On the plus side, it keeps pre-literate idiots out of overpowered and undersuspended cars. From a government "oh won't somebody think of the children" perspective, that's a good thing. From a Darwinian perspective, its not so good.

The NSW laws say you can't do engine performance mods. Suspension, brakes, etc are still "free". So for those people that want to actually learn how to operate a vehicle in anything aside from accelerating in a forward direction only.

Link to comment
https://www.sau.com.au/forums/topic/95776-na-mods/page/2/#findComment-1753129
Share on other sites

Hey guys

I just bought a 96 GTS-4 NA >_<

I want that unquie skyline sound of the stright 6. Is that possible or u need a turbo? I got a stock system atm...

Also if i install a Air intake kit will it make that deep inducion sound?

Kind Regards,

THai

atleast your car has a rb25de.. you dont need a turbo to get the stright 6 sound. turbos do give the awesome skyline sound but i dont think the cost of owning a turbo justifys it. gts-4 r33s are pretty rare from what i have seen. is yours manual or auto?

an intake kit will help your car make the good sound of a straight 6. ever thought of replacing the factory black pipe from the AFM to the throttle body with some metal pipe? your car will scream. larger exhaust piping plus some free flow mufflers will help you get that sound. or just chuck some coby resonators in there.

this is a link to a sound file that screamin'_skyline car that has a very simialr set up as what i discribed http://homepages.paradise.net.nz/jswright/screamin.html click on launch to see how it sounds when taking off

Link to comment
https://www.sau.com.au/forums/topic/95776-na-mods/page/2/#findComment-1753836
Share on other sites

Hey BADR33,

Thanks for ya feedbak mate greatly appreciated!

Yeh theres only like 2 in adelaide i think i dunnoz?

Yeh i just bought the car yest n collecting it on 2moro.

My prob get air intake (kand N or Apexi) then an after market cat bk exhuast.

LOL its an auto..... :O but dats why i got it hell cheap...

Future plan is to do engine swap... but it still early days so i cintinue to do research.

What car u got bud?

Link to comment
https://www.sau.com.au/forums/topic/95776-na-mods/page/2/#findComment-1753994
Share on other sites

mine is rb30de ( non turbo ) it has extractors and 2 1/4" exhaust system , with one muffler . the first intake i had was 3'' stainless pipe . now have 2 x throttle bodies and 2 pod filters . The sound is really really good . Its hard to describe brm brm noises , but when i run at the drags with the pipes undone at the extractors outlet flange , well the sound is one of the best car noises around

Link to comment
https://www.sau.com.au/forums/topic/95776-na-mods/page/2/#findComment-1754594
Share on other sites

Hey BADR33,

Thanks for ya feedbak mate greatly appreciated!

Yeh theres only  like 2 in adelaide i think i dunnoz?

Yeh i just bought the car yest n collecting it on 2moro.

My prob get air intake (kand N or Apexi) then an after market cat bk exhuast.

LOL its an auto..... :P but dats why i got it hell cheap...

Future plan is to do engine swap... but it still early days so i cintinue to do research.

What car u got bud?

all good dude.

i have a 97 r33 gts manual 4dr with the mighty old rb20E!! haha.

im just starting work on my rb30de build. i could go turbo cus my rb30 block has the fittings there. but i love N/A and turbos are just becoming so commen and insurance is a killer.

i have a simialr set up to that car with the sound clip. just im using a factory rear muffler off a gts25t so i think my car is that great sounding from behind but the intake sound is what gets me all the looks ;) plus it looks bling as cus i used aluminum pipe and i polished it.

autos arnt that bad. my mate just put a rb20det in to his gts auto. and he says that he floors it and when it changes gear there is no turbo lag it just keeps pulling.

yeah keep researching. do searches on here and on www.skylinesdownunder.co.nz

on there you don't get shot down as bad as you do on here. lol

Link to comment
https://www.sau.com.au/forums/topic/95776-na-mods/page/2/#findComment-1759163
Share on other sites

mine is rb30de ( non turbo ) it has extractors and 2 1/4" exhaust system , with one muffler . the first intake i had was 3'' stainless pipe . now have 2 x throttle bodies and 2 pod filters . The sound is really really good . Its hard to describe brm brm noises , but when i run at the drags with the pipes undone at the extractors outlet flange , well the sound is one of the best car noises around

they let you do that? it doesn't get classed as too loud? also how do you mount the front pipes so they don't wobble round?

Link to comment
https://www.sau.com.au/forums/topic/95776-na-mods/page/2/#findComment-1759975
Share on other sites

they let you do that? it doesn't get classed as too loud? also how do you mount the front pipes so they don't wobble round?

yess tis a bit loud , but try and dry sanely most of the time , no probs with pipeswobbling around

Edited by dondesoto
Link to comment
https://www.sau.com.au/forums/topic/95776-na-mods/page/2/#findComment-1760603
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...