Jump to content
SAU Community

WTF is up with my BOV!! i have 2!!

Guest | hype^ |

By Guest | hype^ |,
in New South Wales

 Share

Recommended Posts

Guest | hype^ |

Guest | hype^ |

Posted
Posted

check this out guys!!

when i bought the car i thought it had a stock BOV on .. but today i saw a piece of metal with "blitz" on it.. under the air box

im like cool iv got sumthin thats blitz...

i take a closer look and its a F**kn bov!!!

some idiot but a blitz bov on the car under the airbox and left the stock 1 there!!

and coz the stock 1 is ferther back the blitz 1 doesnt even get to go off!! it aint loud at all..

u cant hear the bov properly when u just rev it on the spot! only a lil on changes!!

what the hell do i do??

i was thinking of swaping the blitz and stock bovs around so the blitz 1 is the 1 used first for better sound..

or maybe replace the stock 1 with the blitz and some how block the hole where the blitz 1 was off (iv got nfi how to block it!)

what do uz recon??? :P

Link to comment
https://www.sau.com.au/forums/topic/958-wtf-is-up-with-my-bov-i-have-2/
Share on other sites
PranK Grand Master

PranK

Posted
Posted

mine is right next to my intercooler, and if anyone on these boards has heard it, they will agree with me when i say it is BLOODY loud!!!!

My stock one just blocks up that piping..

see...

Guest | hype^ |

Guest | hype^ |

Posted
Posted

dam prank! nice position! - my blitz is right under the airbox :P iv got no idea why they put it there.. but it should sound better after i remove the airbox and get a filter ;)

prank.. the problem with mine was that the stock was not blocked off..

so the air was filtering through the stock 1 and didnt have a chance to get to the blitz.

i fixed it today..;)

i but a piece of metal between the piping and the stock valve..

now he air goes straight to the blitz bov!

sounds nice!!!

but i need more boost and a POD filter and exhaust ;) to make it sound louder:uh-huh: :D;)

PranK Grand Master

PranK

Posted
Posted

yeah. its VERY loud there... if i hit boost hard through any tunnels (spesh the harbour tunnel) it is seriously deafening. My whole front bar shakes when it goes off.

Yeah, i luuuurve my DTMS!! :P:D (thanks too).

JiMb0 experienced my bov at low boost last w/end. ;)

Guest | hype^ |

Guest | hype^ |

Posted
Posted

YEH PRANK!!

was i impressed or what!!!

did i hear u right in saying that it was only 2pound!??

that thing was loud as hell!!

:uh-huh:

i like the way u pulled right up next to my window with the wheel.. :lol:

and i got laughted at by prank's gf when i showed him mine,!

i cant believe its the same valve!!!:eek:

PranK Grand Master

PranK

Posted
Posted

that was Bec 2. :) I have 2 becs, my gf and my other bec (a good friend) - that was my friend Bec, not my gf.... it gets confusing.

yeah, when i lifted off it had only hit 2psi. :) or thereabouts.

GTR80Y, i need to angle the valve upward!! ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Stagea Front CV Axle Question

      By Duncan · Posted

      I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • soviet_merlin
      Stagea Front CV Axle Question

      By soviet_merlin · Posted

      One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • S1_C34
      Stagea Front CV Axle Question

      By S1_C34 · Posted

      I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • TurboTapin
      CD009 RB Conversion

      By TurboTapin · Posted

      Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Nightmare_mistress_R33
      CD009 RB Conversion

      By Nightmare_mistress_R33 · Posted

      Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...