Jump to content
SAU Community

Recommended Posts

Currently. This is just to see the interest in those wanting to purchase a Nismo Leather Gear Knob for their R33 Skyline.

The gear knob has a greater feel for when changing gears and is designed for any 5speed R33 GTS-T manual gearbox. It's 10mm and able to screw straight onto any GTS-T gear stick that hasn't been modified.

It may also be able to fit onto a R33 GT-R and possibly any R32 or R34. However, it is recommended before purchasing one of these that you check the gear stick and that it is 10mm.

Start date: 22nd November, 2005.

End date: 28th November, 2005.

Please note:

This is only to see the interest from those wanting to purchase one of these gear knobs. If I see the interest of 10 or more wanting to purchase one of these, I'll go through with the order.

Price: $74.95 which also includes postage from Brisbane.

post-22617-1132618942.jpg

Sample image of what the gear knob will look like once you've received it.

Edited by r33skyliner
Link to comment
https://www.sau.com.au/forums/topic/95825-gb-nismo-leather-gear-knob/
Share on other sites

I'm interested but admittedly have not measured my gearknob (Stock Series II R33 GTS25T) and will be emailing a mate of mine to see if he is keen too. Are these genuine?

Edited by ActionDan

I'd just started looking into these and found items for $100 delivered so thought this was a good price. Upon looking at Nengun, I see it's a little over priced perhaps.

I didnt even look at the Nengun site.

I found another site that was offering it at the price I've offered them at above including postage of course.

Just looked at the Nengun website and they aren't offering discounted prices on bulk purchases.

I'll look further into other posibilties tomorrow while at work and see what I can come up with then.

Just to confirm, they are in Japan right? as the freight prices seem a bit much.

Dezz: How much longer til she arrives mate? (You are the dude who pm'd me about my car right?) :)

lol yeah dont wanna get this thread off topic, but yeah my car is in brisbane today or tomorrow.

as for the GB. nengun are in japan. and for items like these, the postage is about $20...and unfortunately they dont send things with combined postage total.... i priced 3 items (clear indicators, nismo key, and this gear knob) all had about $20 postage....but still work out well cheaper than anywhere else ive seen.

Yer, I really like the Nismo Leather Gearknob, hopefully r33skyliner can come up with something price wise =)

Awesome news on the car, so close you can taste it hey.....

Having been in that situation (waiting) and coming from a similar car to you, god damn you are gonna love it =D Don't even say the words Fuel Economy for a while and don't be surprised when you drop the clutch and leave two big black marks from the rear, that's right... TWO marks and from the REAR. LoL None of this single spinner from the front junk =D

Woops, Thread Hijack Detected =\

I'm interested but admittedly have not measured my gearknob (Stock Series II R33 GTS25T) and will be emailing a mate of mine to see if he is keen too. Are these genuine?

yea it will fit. Ive got one in my car.

Okay..... seems as though the best option i'm going to be able to do is around the $65-$70 mark.

Of course, this is coming from Nengun....

a) I'll purchase them all in bulk so that they all arrive here in the one package.

B) Once received, I've then got to send them out to you. So the extra $5-$10 ontop of the nengun price will include the cost of posting it from me to you.

Now, Nengun being a business and I know how businesses think these days, it would probably be best to have it posted all in bulk for 1 reason - The bigger the order you place with a company like Nengun, the more quicker they'll send the box out to you.

example -

I order 11 gear knob sticks (total of $660) and someone else orders 1x gear knob. Which do you think the business is more interested in making happy and making sure they return again?

This I know from 2 experiences...

1) Running my own business (though you may say this is bad business on my behalf. But when you have someone buying things in bulk, you look after them a bit better).

2) When I use to work in a computer store.

Only reason I state $5-$10 for postage is cause I wont know the exact cost of the postage for it till it arrives and I can then take it down to Aust. Post and have it weighed.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
×
×
  • Create New...