Jump to content
SAU Community

Recommended Posts

  • Replies 183
  • Created
  • Last Reply

Top Posters In This Topic

So you guys really rate the GCG hi-flow as the best option for the 34GTT?  I have an auto as well and probably chasing 250rwkw for the time being.  How much extra kw will this turbo give just by itself :D  I'm currently on about 200 so I don't know.  If it's a long way off, I might as well get a different turbo.

We rate it as a good comprimise. An upgraded turbo needs supporting mods like injectors, fuel pump etc. to be used properly.

Pick a power figure then pick a turbo to suit. You don't want 250rwkw with a 2835ProS because you are wasting the turbos top end and therefore introducing needless lag. But if you can get 250 with a GCG highflow without getting out of its efficiency zone then you have chosen the right turbo for your required power. (And saved yourself a big pile of money in the process:D)

Search!!!

Since i searched this to death recently... :

without cams most are getting 230-250rwkw, mostly 240-250, some are around 220-230 (and seem to have been a little disappointed)

with cams up to 265 eg SK's cars

I spent a lot of time trying to compare GCG hiflows Vs HKS GT-RS, but i can't find many power figures for the HKS item :( they seem fairly similar though...

Edited by Beeble

All the information you guys need is already on here.

For a GT-RS or GCG highflow you will need injectors, fuel pump, probably a fuel regulator, full exhaust, high flow panel filter or pod in a box, some sort of engine management and modification or replacement of the AFM to turbo pipe which will suck closed at this power level.

A GT-RS is a slight step up from the GCG HF. People have achieved 300rwkw with cams. If you high flow an R33 turbo you will not get as much power as a highflow of the R34 turbo as the exhaust housing is bigger on the R34. An alternative is to put a VG30 rear housing on the R33 turbo.

I've got 480cc Nismo injectors. I don't know/remember what Bass Junky has used. Also, did you go to Z32 AFM Bass?

i had my car dyno'd the other day as i had a ebc fitted to stop rich retard or boost cut or whatever it was. With stock computer and boosted to 10psi i only pulled 160rwkw. I have blitz lm fmic 3" exhaust filter. That seems a little low what do you guys think. Its and auto r34 by the way.

Bass,

Id like to compare your car to mine as i pulled 244 rwkw in my R33 HKS 2535 on 14psi (no cams), on the Racepace dyno.

It would be interesting to see how they compare!

Can i race the winner, ive got a 2535 and only pushed 231rwkw.

thanks bass.

was that with same mods as me? ie I/C exhaust?

i have bought emanage ultimate and am waiting for an ignition signal adaptor to come so i can fit it. I wonder how much more power i get. How much did you get with computer?

SK's 265rwkw figure was recorded in Shootout mode which at 250rwkw reportedly gives about 10-15 rwkw higher figure.

Quick clarificatin, we have been able to duplicate the 265 rwkw (+ or - a couple of rwkw) in non Shoot Out mode. Several times during winter with ambient temperatures in the mid teens and inlet (to the filter) temps just under 20 degrees.

It is one of the reasons why I can confidently say that Shoot Out mode doesn't ALWAYS give higher power readings. Well, not on our dyno anyway.

:( cheers :(

What is the most power you can get out of a GCG hi-flow with all supporting mods on an R33 GTS-T manual?

We have seen an R34GTT (R34GTT turbine housing) with 275 rwkw. That's on Sydney Optimax. If I remember rightly Bullant (Ian) acheived similar with his R33GTST using a VG30 turbine housing. Using Elf TurboMax I have seen 310 rwkw.

:( cheers :(

Edited by Sydneykid

OK so a GCG hi-flow would be good for up to about 250rwkw... after a decent tune. I'm assuming that the SAFCII won't be good enough for tuning purposes?

So for all supporting mods:

1 x hi flo turbo or similiar

1 x new fuel pump

1 x adjustable fule reg

1 x new management system???

Would you guys reccomend getting new injectors or would the R34 stock injectors be good for 250rwkw?

Stan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...