Jump to content
SAU Community

Recommended Posts

There are 2 cefiros in the driveway and 1 has to go, located in adelaide, prefer SA buyers, mods as follows

ENGINE

RB20det manual

manual conversion done in Australia

R33 gtst turbo

3 inch one piece dump and front pipe

Apexi cat back system

600x300x76 front mount kit

HKS pod filter

Dr drift boost controller

Bosch 040 fuel pump

SUSPENSION AND DRIVELINE

Tein HR coilovers height and camber adjustable

9.5kg/mm front and 7.5kg/mm rear springs

front strut brace

Extreme 5 puk single plate clutch

KAAZ 2 way LSD

EXTERIOR

factory front and rear bars

aftermarket side skirts unknown brand

AVS model 6 rims 16x7 front and 17x7 rear

INTERIOR

R32 gtst front seats

aftermarket steering wheel unknown brand

alloy shift knob

drift handbrake button

oil temp / water temp / boost gauges

PRICE

$13,200 negotiable

EXTRA INFO

Mechanicaly the car is fine and has been serviced regularly. A dyno run after the front mount and pump were installed made 152rwkw at 0.8 bar with no tuning running very rich 10.5 : 1 air fuel. The body is generally good except the bonnet lets it down. It has two dents near the front edge and the holes from previous bonnet pins have rubber inserts in them like you can see in the photo. Interior is in excellent condition with only the passenger side vent surround missing. Aircon has been removed but is available. It has seen 3 drift practice days but as it arrived in OZ with auto I assume it has only been thrashed by me. Im not on the forum often maybe every few nights so if your genuinly interested call Chris on 0401 483 906

http://www.skylinesaustralia.com/photopost...o/19222/cat/513

http://www.skylinesaustralia.com/photopost...o/19223/cat/513

http://www.skylinesaustralia.com/photopost...o/19224/cat/513

http://www.skylinesaustralia.com/photopost...o/19225/cat/513

http://www.skylinesaustralia.com/photopost...o/19226/cat/513

Link to comment
https://www.sau.com.au/forums/topic/96065-a31-cefiro-rb20det-turbo-manual/
Share on other sites

hay champ, i seen u out at Lala on the weekend in the sr ceffy, u were doin gd!!

I actually live just on the next road from u! I am keen to have a look at the car so pm me or somethin so i can have a chat!

cheers Josh

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hope it's actually possible. This is a write off in insurance world.
    • Yup. 2-way with shallow ramp angles. Still works.
    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
×
×
  • Create New...