Jump to content
SAU Community

Recommended Posts

well if you have to add a cross-over what exactly is the benefit to running a twin exhaust?

would one large pipe not do the same ?

The cross over won't necessarily decrease the volume of your 2 pipes.

In most setups, the crossover point is just a part of those 2 pipes that are joined, and have their connecting wall removed. It doesn't go into one pipe as such. So your total cross sectional area is not decreased, unlike with a single pipe with the same ground clearance.

The performance reason V8s do it is for scavenging, due to the firing order. With the way the exhaust pulses go down the exhaust there are benefits to having your twin pipes linked at one point.

so in short..

increased flow with better clearance.

so there is a reason.

what if your turbos WERE sequentially staged, would there not be greater benefit to running completley seperate systems?

because from a pressure point of view if one turbo is reacting first would that not create an increase in pressure behind that turbo and where the pipes join create back pressure for the second turbo ???

what if your turbos WERE sequentially staged, would there not be greater benefit to running completley seperate systems?

The answer is no, but I'm not sure how to explain it in a pithy manner.

Its going to actually be worse. If you have 2 completely separate exhaust systems (i.e. from the manifold onwards) then you're only getting half the exhaust load for each turbo, so you have to run smaller ones to make it viable, or introduce too much lag (which defeats the purpose of sequential turbos).

The plumbing would be a lot easier than the bypass-ridden setup that people actually use, but you'd only run "identical twin" turbos if you were to have 2 separate systems.

if i had a gtr i would have, custom tbo manifold, dual 3 inch from tbo back no cat or muffler just rear resonator, and a cross over pipe half way

well you have never had a full twin from front pipes(TWIN 3") have you.I confess i did not have X-over pipe you recommed just two rear individual mufflers.Had the RB scream but with a gurgle.It could be heard 3KM away on a warm summers night Just north of Adelaide .keep that in mind "IF YOU HAD A GTR".SYstem for sale(800km old) as now have 90mm titanium.

Yeah ill be using a cross over, same setup as a lot of twin GTR's in vic.

bear in mind my aim is not to be heard 3km away. I drive the car a little more than once a week and it is being built to pass noice etc

well I have a twin system on my GTR.... if you search under my name there are a stack of pics, and like yellow GTR man :) it is insane loud but sounds oh so cooool....

oh BTW I have a apexi butterfly valve to shut it up for some people that think 130db is anti social...

:D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...