Jump to content
SAU Community

Recommended Posts

As it sais

I just got a camera, i dont know anything about camera's.. i just wanted one that takes photos and doesnt have jibberish settings that i can take out wherever and start snappin!

I got a Sony Cyber-shot DSCS40

It's a 4.1mp camera with 3x Optical zoom and seemd pretty good for the price and its a point and shoot camera that will fit in your pocket which is what im after.

I got it for $290 delivered with 4x NiHM rechargeable batteries with charger.

I will get a memory stick for it off ebay as they damn cheap..

dscs40-1.jpg

Did i do well?

Link to comment
https://www.sau.com.au/forums/topic/98497-i-just-got-myself-my-1st-camera/
Share on other sites

Sorry to hijack your thread but what do you guys think of the Kodak z740 10X optical zoom with printer dock plus for $430 brand new. Is it worth getting any lens filters for it? And if you have used one what do you think of the picture quality? I don’t know anything about cameras and would just like to know if it is a good camera to get me started?

Sorry to hijack your thread but what do you guys think of the Kodak z740 10X optical zoom  with printer dock plus for $430 brand new. Is it worth getting any lens  filters for it? And if you have used one what do you think of the picture quality? I don’t know anything about cameras and  would just like to know if it is a good camera to get me started?

kodaks have horrible picture quality

You did ok. :P

<click>

A friend has a digital sony camera, I was quite impressed with the like like saturation it has. Very nice balanced photo's.

Don't buy HP their saturation is too high and tend to get a lot of noise in the back ground, i.e walls or darker areas.

Edited by Cubes
Get yourself a copy of Photoshop, or Paint Shop Pro at least.

MSpaint has horrible compression and quality loss.

I secont that.. MS paint and MS photo viwer are evil!!!

evey time you use MS paint to compress picture angel looses their wings...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...