Jump to content
SAU Community

Key Cutting

Turbz_13

By Turbz_13,
in South Australia

 Share

Recommended Posts

Turbz_13 Experienced

Turbz_13

Posted
Posted (edited)

hi, i need to have a new key cut for a r32, i was just wondering if any1 knows if i can get this done through nissan, as i have the original key for my car and it was fairly worn and mildly cracked. i could get it done through a key cutter but it wont last too long i wouldnt think. cheers guys

Edited by Turbz_13
Link to comment
https://www.sau.com.au/forums/topic/98594-key-cutting/
Share on other sites
chalon Rising Star

chalon

Posted
Posted (edited)
hi, i need to have a new key cut for a r32, i was just wondering if any1 knows if i can get this done through nissan, as i have the original key for my car and it was fairly worn and mildly cracked. i could get it done through a key cutter but it wont last too long i wouldnt think. cheers guys

I got the key for my R32 GTR cut by these guys:

ADELAIDE LOCKSMITHS

Adelaide 150 Hutt St 5000 (08) 8223 5433

Po Box 7005 Hutt St Adelaide 5000

After Hours Emergency Service (08) 8223 5433

Fax (08) 8232 1768

Mobile Service 0408 832 951

Did the cut off the computer code, not off the old key so it's as good as a new one that came from the factory.

I didn't want to waste my $60 genuine GTR key :D

Edited by chalon
Link to comment
https://www.sau.com.au/forums/topic/98594-key-cutting/#findComment-1795517
Share on other sites
Madaz Grand Master

Madaz

Posted
Posted
wat about r33 keys dat comes with the central lockin on the key?

key cutters say it cant be cut?

dont quote me but i would say its more ethics as to why they dont do it rather than it CANT ...

ie ur drunk @ a party thats gone into the next day and ur mate steals ur keys and goes to try get them cut...

or uve had them stolen @ the local swimming center

or they fell out ur pocket and sum1 found them

well i think u get the picture

Link to comment
https://www.sau.com.au/forums/topic/98594-key-cutting/#findComment-1798003
Share on other sites
MYSTR33 Proficient

MYSTR33

Posted
Posted
dont quote me but i would say its more ethics as to why they dont do it rather than it CANT ...

ie ur drunk @ a party thats gone into the next day and ur mate steals ur keys and goes to try get them cut...

or uve had them stolen @ the local swimming center

or they fell out ur pocket and sum1 found them

well i think u get the picture

werd

Link to comment
https://www.sau.com.au/forums/topic/98594-key-cutting/#findComment-1798082
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...