Jump to content
SAU Community

Recommended Posts

Item: various car parts

Location: sydney, northern beaches

Item Condition: new and used

Reason for Selling: going overseas and selling my car and car parts

CAR PARTS: WILL NOT COD ANYTIHNG

r32 GTR injectors no resister pack - $200

r32 gtst intercooler kit (intercooler and piping) BRAND NEW - ON HOLD

exact same as http://cgi.ebay.com.au/NEW-Intercooler-Pip...1QQcmdZViewItem

r33 front rotors (will need machining as they have been siting in my garage for a while) - $50

Apexi panel filter excellent condition. came with the car when it was imported - $75

Old crappy FMIC with bent fins. measures around 600x300x55 - $50

CAR AUDIO

Dynmat extreme 4 sheets 12"x36" - $100

ALSO have some GAB front stuts with springs. was told they slightly lower the car and were rebuilt 5000KMs ago but i cant be 100% sure that was the truth - $100

Edited by DLuded
Link to comment
https://www.sau.com.au/forums/topic/98807-various-car-parts/
Share on other sites

Yep cool.

Well, my offer is $400 which is to include delivery (approx $50), so the intercooler

kit itself would be $350. If you can get higher, be my guest! :)

Thanks,

Adrian.

Yep cool.

Well, my offer is $400 which is to include delivery (approx $50), so the intercooler

kit itself would be $350. If you can get higher, be my guest!  :)

Thanks,

Adrian.

Bear in mind, it's not an open offer. If I don't hear from you soon, I'll assume you've rejected the offer - don't come to me in a year looking for 400 bananas for a front-mount!!!

Thanks,

Adrian.

HAHAHA JONNY CASH HAHAHA

THOSE KITS ARE HYBRID AND I BELEIVE THE R33 32 GTST ARE THE SAME AS IVE SEEN HEAPS OF THEM AND THEY ALWAYS SAY SUIT R33/32 GTS-T

I can't imagine the intercoolers have the exact same mounting brackets on a 32 and a 33, and all the pipes line up exactly the same. There must be some difference between the kits, even if it's just mounting locations for the cooler.

But, as always, I'm open to persuasion, if anyone has fitted a 33 cooler kit on a 32 directly with no alteration or modification, I'll concede.

the one i bought was for a r32 but ive also been told that the r32 and r33 are the same

HAHAHA JONNY CASH HAHAHA

THOSE KITS ARE HYBRID AND I BELEIVE THE R33 32 GTST ARE THE SAME AS IVE SEEN HEAPS OF THEM AND THEY ALWAYS SAY SUIT R33/32 GTS-T

i bought 1 of those fkn ebay coolers they state R32/R33 fmic etc.. the fkn piping is for a 33.. i had so much trouble trying 2 install it!! arrgghh.. all good in the end, saved myself a good 500bucks. ;) B) Just be weary guys if u have rb20.. might find trouble installing. (if its same kit as this)

what was the trouble? there have been several people on SAU use these kit. you have to cut the front support bar, cut a hole under the battery to rout the piping and cut the radiator fan a bit. what was the trouble for you?

everything u said.. If u dont have the right tools makes the job quite hard.. haha. Also, the piping was quite hard 2 install. I managed 2 not cut any of the radiator fan shroud ( i think thats what u were refering 2, not the fan haha). Maybe i was just annoyed that a week later i got defected 4 the fkn cooler because i had 2 cut a whole under the battery 4 the piping!

Im not saying this kit isnt worth 400bucks. its well worth it. If u buy a full cooler n piping kit (NOT OFF THE INTERNET) expect to be paying somewhere around the 1000+ mark.. So i think this is a good buy.

Steve.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...