Jump to content
SAU Community

Recommended Posts

Item: various car parts

Location: sydney, northern beaches

Item Condition: new and used

Reason for Selling: going overseas and selling my car and car parts

CAR PARTS: WILL NOT COD ANYTIHNG

r32 GTR injectors no resister pack - $200

r32 gtst intercooler kit (intercooler and piping) BRAND NEW - ON HOLD

exact same as http://cgi.ebay.com.au/NEW-Intercooler-Pip...1QQcmdZViewItem

r33 front rotors (will need machining as they have been siting in my garage for a while) - $50

Apexi panel filter excellent condition. came with the car when it was imported - $75

Old crappy FMIC with bent fins. measures around 600x300x55 - $50

CAR AUDIO

Dynmat extreme 4 sheets 12"x36" - $100

ALSO have some GAB front stuts with springs. was told they slightly lower the car and were rebuilt 5000KMs ago but i cant be 100% sure that was the truth - $100

Edited by DLuded
Link to comment
https://www.sau.com.au/forums/topic/98807-various-car-parts/
Share on other sites

Yep cool.

Well, my offer is $400 which is to include delivery (approx $50), so the intercooler

kit itself would be $350. If you can get higher, be my guest! :)

Thanks,

Adrian.

Yep cool.

Well, my offer is $400 which is to include delivery (approx $50), so the intercooler

kit itself would be $350. If you can get higher, be my guest!  :)

Thanks,

Adrian.

Bear in mind, it's not an open offer. If I don't hear from you soon, I'll assume you've rejected the offer - don't come to me in a year looking for 400 bananas for a front-mount!!!

Thanks,

Adrian.

HAHAHA JONNY CASH HAHAHA

THOSE KITS ARE HYBRID AND I BELEIVE THE R33 32 GTST ARE THE SAME AS IVE SEEN HEAPS OF THEM AND THEY ALWAYS SAY SUIT R33/32 GTS-T

I can't imagine the intercoolers have the exact same mounting brackets on a 32 and a 33, and all the pipes line up exactly the same. There must be some difference between the kits, even if it's just mounting locations for the cooler.

But, as always, I'm open to persuasion, if anyone has fitted a 33 cooler kit on a 32 directly with no alteration or modification, I'll concede.

the one i bought was for a r32 but ive also been told that the r32 and r33 are the same

HAHAHA JONNY CASH HAHAHA

THOSE KITS ARE HYBRID AND I BELEIVE THE R33 32 GTST ARE THE SAME AS IVE SEEN HEAPS OF THEM AND THEY ALWAYS SAY SUIT R33/32 GTS-T

i bought 1 of those fkn ebay coolers they state R32/R33 fmic etc.. the fkn piping is for a 33.. i had so much trouble trying 2 install it!! arrgghh.. all good in the end, saved myself a good 500bucks. ;) B) Just be weary guys if u have rb20.. might find trouble installing. (if its same kit as this)

what was the trouble? there have been several people on SAU use these kit. you have to cut the front support bar, cut a hole under the battery to rout the piping and cut the radiator fan a bit. what was the trouble for you?

everything u said.. If u dont have the right tools makes the job quite hard.. haha. Also, the piping was quite hard 2 install. I managed 2 not cut any of the radiator fan shroud ( i think thats what u were refering 2, not the fan haha). Maybe i was just annoyed that a week later i got defected 4 the fkn cooler because i had 2 cut a whole under the battery 4 the piping!

Im not saying this kit isnt worth 400bucks. its well worth it. If u buy a full cooler n piping kit (NOT OFF THE INTERNET) expect to be paying somewhere around the 1000+ mark.. So i think this is a good buy.

Steve.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...