Jump to content
SAU Community

Recommended Posts

Item: various car parts

Location: sydney, northern beaches

Item Condition: new and used

Reason for Selling: going overseas and selling my car and car parts

CAR PARTS: WILL NOT COD ANYTIHNG

r32 GTR injectors no resister pack - $200

r32 gtst intercooler kit (intercooler and piping) BRAND NEW - ON HOLD

exact same as http://cgi.ebay.com.au/NEW-Intercooler-Pip...1QQcmdZViewItem

r33 front rotors (will need machining as they have been siting in my garage for a while) - $50

Apexi panel filter excellent condition. came with the car when it was imported - $75

Old crappy FMIC with bent fins. measures around 600x300x55 - $50

CAR AUDIO

Dynmat extreme 4 sheets 12"x36" - $100

ALSO have some GAB front stuts with springs. was told they slightly lower the car and were rebuilt 5000KMs ago but i cant be 100% sure that was the truth - $100

Edited by DLuded
Link to comment
https://www.sau.com.au/forums/topic/98807-various-car-parts/
Share on other sites

Yep cool.

Well, my offer is $400 which is to include delivery (approx $50), so the intercooler

kit itself would be $350. If you can get higher, be my guest! :)

Thanks,

Adrian.

Yep cool.

Well, my offer is $400 which is to include delivery (approx $50), so the intercooler

kit itself would be $350. If you can get higher, be my guest!  :)

Thanks,

Adrian.

Bear in mind, it's not an open offer. If I don't hear from you soon, I'll assume you've rejected the offer - don't come to me in a year looking for 400 bananas for a front-mount!!!

Thanks,

Adrian.

HAHAHA JONNY CASH HAHAHA

THOSE KITS ARE HYBRID AND I BELEIVE THE R33 32 GTST ARE THE SAME AS IVE SEEN HEAPS OF THEM AND THEY ALWAYS SAY SUIT R33/32 GTS-T

I can't imagine the intercoolers have the exact same mounting brackets on a 32 and a 33, and all the pipes line up exactly the same. There must be some difference between the kits, even if it's just mounting locations for the cooler.

But, as always, I'm open to persuasion, if anyone has fitted a 33 cooler kit on a 32 directly with no alteration or modification, I'll concede.

the one i bought was for a r32 but ive also been told that the r32 and r33 are the same

HAHAHA JONNY CASH HAHAHA

THOSE KITS ARE HYBRID AND I BELEIVE THE R33 32 GTST ARE THE SAME AS IVE SEEN HEAPS OF THEM AND THEY ALWAYS SAY SUIT R33/32 GTS-T

i bought 1 of those fkn ebay coolers they state R32/R33 fmic etc.. the fkn piping is for a 33.. i had so much trouble trying 2 install it!! arrgghh.. all good in the end, saved myself a good 500bucks. ;) B) Just be weary guys if u have rb20.. might find trouble installing. (if its same kit as this)

what was the trouble? there have been several people on SAU use these kit. you have to cut the front support bar, cut a hole under the battery to rout the piping and cut the radiator fan a bit. what was the trouble for you?

everything u said.. If u dont have the right tools makes the job quite hard.. haha. Also, the piping was quite hard 2 install. I managed 2 not cut any of the radiator fan shroud ( i think thats what u were refering 2, not the fan haha). Maybe i was just annoyed that a week later i got defected 4 the fkn cooler because i had 2 cut a whole under the battery 4 the piping!

Im not saying this kit isnt worth 400bucks. its well worth it. If u buy a full cooler n piping kit (NOT OFF THE INTERNET) expect to be paying somewhere around the 1000+ mark.. So i think this is a good buy.

Steve.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...