Jump to content
SAU Community

Recommended Posts

R32 Gtst:

Engine: Rb25det conversion (rebuilt, forgies), Flowed head/port polish, HKS 275 camshafts, HKS head gasket, Trust Td06-25g turbo, Trust top mount manifold, Trust 50mm waste-gate, Trust front mount intercooler, Trust Oil cooler and relocation filter kit, GReddy Type-R BOV plumbed backed, 850cc injectors, 3inch dump pipe, 3inch dump pipe back exhaust, custom cold air intake box in standard intercooler position, HKS filter, earth wire kit, huge radiator. HKS F-con V.

Suspension And Running Gear: Rebuilt Rb25det gearbox, brand new twin plate OS clutch, Nismo locker diff, Tein adjustable coilovers, 17inch Nismo rims.

Exterior: Genuine GTR front bar with N1 air slots, Type-M side skirts and rear pods. Blue pearl white respray, Semi clear factory indicators.

Interior: Front and rear GTR seats, Skyline floor mats, custom dash cluster; Auto meter monster tacho, Pivot 350kph digital Speedo, GReddy exhaust temp gauge, GReddy oil temp gauge, GReddy oil presser gauge, Tomei boost gauge, Techtom display unit with shift light, short shifter with Razo gear knob, aircon/heater unit relocated to glove box with HKS F-con, HKS turbo timer and HKS boost controller.

ICE: Jap brand head unit with separate equalizer and aftermarket speakers all round.

490rwhp @ 1.5bar and advanced the timing. Plenty more horse power left to be had if you ditch the F-con, or chase up a retune.

The car has been built as a weekend slider, and street warrior. I don't have quarter mile times, nor never will due to lack of traction and interest in setting the car up for times. What the car has been BUILT for and gets USED for reflects its condition! People who want a show car need not ring this isn't the car for you. In saying that, the car is clean and only has minor marks and a few pin dents. The trim and inside is generally clean, the drivers seat has a small rip in it from my belt, dash is mint and has all aircon vents.

Car is owned by a sales executive, and often sees daily duties, no over heating problems. Been through peak hour morning traffic in Brisbane more then once.

I'm asking $23,500ono OR Swap/Trade The car owes a lot more but my loss is some one else's gain. I'm the first Australian owner, and got the car from a broker, genuine reason for sale; lack of interest and would rather the money for invesments and a more suitable car for work.

*Note* Car is gutted, only has two seats, cage, door trims and dash. All trim come's with car, but you put it in.

Price: $23,500ono OR Swap/Trade.

Location: Noosa Heads, Queensland.

Contact: Josh

Phone: 0407 706 760

Email: [email protected]

Don't PM as I won't check it, all general inquiries on cell # during work hours, unless other wise a very serious buyer.

RWC and Rego negotiated pending price.

R32015.jpg

7127fde0.jpg

Link to comment
https://www.sau.com.au/forums/topic/99337-500hp-ex-track-r32/
Share on other sites

Has Matty tuned the car yet? If im correct in your previous post about this car you said you were going to get him to retune it?

Is the quoted figure from his dyno?

thanks

No he hasn't, I work Monday to Sat. I have zero time to play with cars.

Have you got any pick of the inside and cage?  interested but not sure how ill get it though regency with cage

thanks matt

If you're worried about regency then I think the cage will be the least of your worries.

Greg

Have you got any pick of the inside and cage?  interested but not sure how ill get it though regency with cage

thanks matt

This car won't get through regency the way it is. You would have to take most of the stuff off I'd guess?

Pm me your email addy and I'll send some pics.

yeah cheers, yeah i know ill have to get in to standard which wont be a problem but if there is any signs that a roll cage was fitted then ill have dramas. email me pics on [email protected]

cheers matt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...