Jump to content
SAU Community

Recommended Posts

Hey guys, its been a while, but 2-3 months ago I asked for your advice whether to buy a cheap car or expensive, (most advised cheap), and then which is the best of the cheap cars. I can say, today I got my 1st car.

The car is... well not that cheap, not that expensive. A 1993 Toyota Celica WRC edition. Which is essentially a 93' Celica with stock "bucket seats", and I'm not sure what else comes with it :)

I bought it with 111k km's on the clock, and it belonged to a middle aged woman. It shows, the car is in absolutely pristine condition. In and out.

Here's afew pics from the outside, I apologise for the camera work, it's my phone.

And btw, for all of you interested on price, I payed 8k.

Now that I've got a car, anyone got any tips on keeping it the way it is?

post-9646-1135316956.jpg

post-9646-1135317001.jpg

post-9646-1135317078.jpg

Link to comment
https://www.sau.com.au/forums/topic/99418-followup-i-got-my-1st-car/
Share on other sites

Dammit, you should have put in a bit more and got a GT4!

Oh well, as long as you're happy.

Haha, I would have, but insurance would be through the roof.. turbo + 17 yr old = 2k a year...

This is the car is going to be the car I learn how to drive well in, and maybe 6 months - a year down the track I'll get my beast..

tips on keeping it looking good?...buy some good polish like meguirs paint cleaner, meguirs wet look deep crystal polymer sealant polish and a micro fibre polishing mit

wash the car then chamois dry.

polish the whole car with paint cleaner then,

polish the car again with the 'wet look' polish

the bitch will sparkle!! :D

Congrats!!! first car is always exciting!! Looks like a nice car and I love the colour!

oh, and well done for being sensible :D

insure it under your name too...will save you a bit when you upgrade to a Skyline or whatever if you have a bit of NCB under your belt..

yea well done on the firsty!!

dont worry about the power, your 17, just dump it on some nice wheels, put in a decent thumping system to piss the locals off, and then jock the bitches!

im sure one of your mates will have high powerd car... so you can get ur jollies off, its a lot cheaper that way!!

I hate my car sometimes... no insurance, nearly no licence, no petrol, no money to blody do anything let alone get my car fixed. constantly paranoid with the police. It's nearly not worth the effort. sigh

good luck with the car!

8k for a 93 model celica? shit, you can buy an r32 gtst for that price.

a peice of shit r32 gtst. I wouldnt pay 8k for a r32 and expect it not to need alot of work to get it looking/running nice

then again prices would vary from state to state and might get lucky with importing yourselfg.. but still..

its not as funny as it sounds. looking at j-specs list on a daily basis i see series 2 R33 GTS-T's landed and complied for $13-$15k and they dont LOOK fked....surely they arent in mad condition, but still, thats a 96/97 model

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...