Jump to content
SAU Community

Recommended Posts

This mite be a stupid question but as far as i know the V8 supercars use a spark plug near the end of their exhausts to create the fire you see out the back...i think this is there so it creates some sort of back pressure or something like that...

i guess wat i'm asking is if we were to place a spark plug near the end of our exhausts wouldn't that cause a pull of air through the turbo on gear changes keeping it spinning.

i'm not looking to do this for the rice factor just interested if it would work and how i wud go about doing it.

also would there be a way to turn it on and off.

thanks for any feedback...also be nice with replys i'm learning still.

cheers, Mark

Link to comment
https://www.sau.com.au/forums/topic/99774-faster-spool-up/
Share on other sites

you can use aftermarket 3rd party tools to help assist with turbo lag and "spooling up" if this is what you are referring to? I suggest you do a search on anti-lag. the idea is to retard the timing and dump fuel on gearchange to keep the exhaust housing spinning and so when you come back on throttle the turbo is still spinning at a higher speed that it would have been when you back off throttle the normal method. the result well in theory is not as much lag as the turbine is still running at a high speed, enough to bring the compressor back into its efficiency zone quickly

Link to comment
https://www.sau.com.au/forums/topic/99774-faster-spool-up/#findComment-1817534
Share on other sites

Back pressure is not something you want in a turbo setup. That will increase lag, not decrease it.

So, logically speaking, if the V8 Supercars were igniting fuel in the exhausts to generate back pressure...it would be counter productive on a turbocharged car. It wouldn't "pull air" through the exhaust - it would just block it.

Of course, as people have said above its not the case. You can blow flames just as easily in your car by pulling out your cat and running non-baffled mufflers. Just rev the car hard and pop off the gas.

Link to comment
https://www.sau.com.au/forums/topic/99774-faster-spool-up/#findComment-1818662
Share on other sites

A fair few pro off-street race cars will run anti-lag. Most involve dumping excess fuel on throttle-off (normally by running it rich and taking timing out), and will either use a spark plug in the turbo's exhaust housing or rely on the hot turbine itself to ignite the fuel.

Normally they'll use an aftermarket ECU, so you can program and choose what conditions you want the anti-lag to kick in.

Aside from being very street illegal, you have to be a pro racer to run such a setup since your turbocharger then becomes a consumable. There's few faster ways of f**king your turbo's wheel than causing explosions on them.

Link to comment
https://www.sau.com.au/forums/topic/99774-faster-spool-up/#findComment-1818665
Share on other sites

like i said it was just someone telling me they had been wondering about it who maybe doesn't know much at all. ohwell was worth asking...i didn't think it sounded right hence the "be nice with ur replies" part

Link to comment
https://www.sau.com.au/forums/topic/99774-faster-spool-up/#findComment-1818870
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
    • So, a bit of a side trip, but one that might be interesting for people with JDM cars and japanese head units. I know @Pac previously posted about a carplay/android auto adapter he installed which used the AUX input, and @V35_Paul put in one of the Tesla style units that replace both screens. The option I went with was a Lsait LLT-YF-VER5.87_2 (https://www.alibaba.com/product-detail/Lsailt-8GB-Android-Multimedia-Interface-for_1601187633672.html). Price was $1,150 for a single unit although they are much cheaper if you are willing to buy 2....$857ea. Make you you get the version 2 not version 1, it is faster and has a better UI - this is the manufacturer listing: http://www.lsailt.com/product/348.html. BTW if you've never bought from Alibaba before, don't be concerned....these guys can't stay in business unless they are responsive, ship fast etc, they were excellent (probably faster shipping than most local places) So, this was my task for a lazy Sat afternoon....looks complex but was all done in a few hours (it probably helps that I had some of it apart before so it was a bit familiar). I also decided to add a HD USB drive recorded at the same time and the unit also supports an aftermarket reverse cam (if you don't want to retain factory) and also AV in and HDMI out It looks much worse than it is, in fact in was genuinely all plug and play (no custom wiring at all). This video was pretty good (skipped a few steps), unfortunately they are an Aussie seller but no longer sell this unit (I guess Carplay/AA adapters are easier to install and much cheaper) https://www.youtube.com/watch?v=T5hJfYOB8Dg
    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
×
×
  • Create New...