-
Posts
143 -
Joined
-
Last visited
-
Feedback
0%
Profile Information
-
Location
日本
Profile Fields
-
Car(s)
r33 gtr
-
Real Name
Mike
Recent Profile Visitors
3,534 profile views
Meathead's Achievements
-
Compression test results. Bad or still ok?
Meathead replied to erazor.'s topic in Forced Induction Performance
Only way to know condition of piston/bore/valves is to do a leak down test regardless of cams and any other mods. -
Fly By Wire Throttle - 6 Throttle Rb26
Meathead replied to Sub Boy32's topic in Forced Induction Performance
Many thanks! -
Fly By Wire Throttle - 6 Throttle Rb26
Meathead replied to Sub Boy32's topic in Forced Induction Performance
Hey Stefan, which DBW actuator are you supplying with the kit please? -
That help you out iruvyouskyrine?
-
https://www.chevyhardcore.com/news/rebuilding-atis-super-damper-is-super-economical/
-
The elastomer o'rings should be replaced every 10 years if its mainly street. If you are in the states it only costs $75 to overhaul and re-certify SFI . I'm not so just bought an overhaul kit (~$35) and did it myself. Fairly basic job, cleanliness and care with orings during assembly is all that is required . Blue loctite on bolts and correct torque.
-
Seems rather excessive for a high silicone piston.
-
Very weak spark help
Meathead replied to Trinc33's topic in RB Series - R31, R32, R33, R34 (1986-2002)
Check earths, poor igniter earth possibly. -
Borg Warner EFR Series Turbo's V 2.0
Meathead replied to Piggaz's topic in Forced Induction Performance
Good luck! -
Prefference For Stroker Cranks 77.7 Or 73.7mm Stroke.
Meathead replied to STATUS's topic in Forced Induction Performance
I was looking at some of their cams a while back and was wondering where they popped up from. Ended up getting some custom Camtechs out of NSW made up instead to feed the EFR. So has one partner started RSE and the other still running Tomei? You should put a Jun 2.8 kit or the famous 2.7 seeing as how they are so close, they can do your block also and set it up perfect! I'm about 5 hours drive away from you by the look of it. -
Prefference For Stroker Cranks 77.7 Or 73.7mm Stroke.
Meathead replied to STATUS's topic in Forced Induction Performance
https://www.junauto.co.jp/products/crankshaft/index.html https://www.hirano-tire.co.jp/tomei/rb26/rb26-1-5.html http://www.nitto.com.au/products/crankshafts.html?vehicle=nissan -
Autech version
-
Yawn
-
Why do people hate the R33?
Meathead replied to Laurence's topic in RB Series - R31, R32, R33, R34 (1986-2002)
Complete dog's bollicks