kresot9

i bought myself some new coil packs but im a bit edgey with the caution they are stating after installing the split fire 008 coil packs That the ignition timing may be needed to be done due to the increase of ignition energy and it will also cause a loud knocking sound. Anyone else seen this on their installation papers before and should i need to worry?

With the cold start valves what should i look for exactly? Smells, discoloration, marks? Also any possibly way to explain how i would go and remove it?

my bad, it wasn't intentional just finger slipped the R and T are close With spark plugs i got these ones 'Iridium Option BKR5EIX-11' which was from 'http://www.sau.com.au/forums/topic/32825-na-skyline-spark-plug-numbers/' Silly questions, where and how do i check the cold start valve and the plugs, also it runs 100% when warm even driving it for 45mins it was good, the AAC? if you do not mind explaining also thanks

Hey all I can't take it anymore with the issue and its time for DIY and learn and save $$$. I drive a r34 4door rb25de neo manual Firstly i would like to say last year before the end of November i bought new spark plugs and had them replaced because the rocket cover gasket needed to be replace so might as well change of the spark plugs as well. With this change the car has been running perfectly without a beat until last week. I have been noticing the car was causing some issues after roughly 10-15minutes of driving from cold start, it was coughing and losing power, it took a bit to notice but then become a lot more noticeable during cold starts and honestly felt like it was misfiring. After some time driving and the tempt reaches normal the engine runs smoothly and no misfire at all. So here it is, I would like to know how can i go on and diagnose the problem and try and fix it, without having the diagnostic tools and electronics. From reading through different posts, the most common places to check are the spark plugs and the coil packs, that is all i know. I do not own a lot of tools as well if it comes down to having something really specific to fix it. (I do have a torque wrench lol)

Hey all I am interest on how bad are my wheels sitting with camber and toe i have attached an image that i received when the wheel alignment was done. All i can assume is the target data is the data they believe is the best for my vehicle, it is stating on the on paper the vehicle i drive thanks

@cowboy my bad i forgot to mention I'm in Geelong VIC

thanks for the help, everyone, the only thing lastly i could ask is where to look for the parts i been looking over on justjap for parts and they seem reasonably priced

well at most with everything i have done to the car previously i have always saved a lot more money finding my own parts and and even if i can do it my self saves money. @zoomzoom - i am so so with DIY if i know what i need to do then im good but for something like bushes i have never looked at or might not have the correct tools for me to do them also, at most the best is knowing where i can get decent prices for the parts

hey all I have just gotten my car back from being serviced and asked for a list of things that required to be looked at or fixed eventually to prevent any further damage and so here it is Radiator replaced / $556 replace thrust bearing (since taking clutch out we assumed to you might as well buy a new clutch while you are at it) two clutch kits one is $804 other $1500 front strut bar bushes / $245 rocker cover gasket, also suggesting to replace spark plugs while at it / $415 front and rear struts / $1695 The prices are what they gave me for the cost of the parts not including labour, i am certainly sure i can get majority of the parts cheaper although it will come down to where and what preferred part am i needing to get. I drive a R34 Sedan RB25DE NEO, any help that could suggest how i can go on with getting these parts and purchasing them. Thanks

I would like to buy a window regulator exactly the same as in the pictures below, it is the driver door window regulator it had came from a 2001 r34 25gt sedan, preferably somewhere in victoria and willing to pickup thanks

Hey all So my driver window motor has given up, i had some issues with it previously and got it repaired although the auto electrician said it will eventually give way again and so it has The pictures below are the motor found in my car, 2001 r34 25gt sedan and im not too sure if it matters from different series. Im willing to pickup the item or if anyone knows where i could go purchase one.

Hey all Im looking for a r34 na manual, a car that has low kms like 160k down, in good running condition. Im currently on a budget on 8-9grand i could possible go higher about 10-11g unless i sell my current car. Cheers Kres