stripey

Just go takeros lip on aero bar. Just adds little wing things to side to tie in with side skirts

Check engine light on so did the sequence and im getting 805 and cant find it anywhere unless im reading it wrong ? Edit.. Code was read wrong 1805 as i just dismissed first flash. Its faulty stop lamp switch.

Following as i hope this can work. I can hear it now rd28 turbo spool up and spool down in a stagea wagon. How cool is that

Does it sound like this kind of whine ?

I should have worded it a bit better. They use the whole turbo unit not just the core. mentioned on a couple of different cars also the greddy T618Z was also mentioned. but in saying this some parts may have been lost in translation just food for thought

been doing some reading on some sites translated by google and apparently a HKS GT-RS turbine is a direct replacement for factory? been done on a few in japan

Go volvo blue.. play with the minds of the volvo purists hehe

What can you read with that unit? And does it work?

Good to see you have it figured out That might be what i need to do with mine. As soon as i would plug connector in back of stereo it would turn off. I have an earth wire just floating about. I really dont want to be pulling all the car apart again done it 5 times since purchase haha

250t rs four Aero selection front bumper with fogs Aero selection weather sheilds Aero selection floor mats Factory steering wheel controls for audio and cruise control. Bilstein suspension.

http://www.sau.com.au/forums/topic/422866-how-to-get-your-steering-wheel-stereo-controls-working/?fromsearch=1

Richzx did a write up on it a while ago got it working. Previous ownerof my car

id say as a mass produced car with many options. one loom was made with many connectors for the many options available. cost/time. will be following as i have steering wheel controls that come to plug behind stereo just cant get them to work with my head unit

Unless it was already converted to english and you have somehow changed the settings ? It would be impossible to get it to English and sat nav is redundant here in aus anyway only function that would be of any use is fuel consumption menu

not ebay. but if you get yourself a 45mm boost gauge could be a good litlle mod a pillar with 45mm tweeter cut out http://www.jauce.com/auction/u100758329

Changed oil and belts today. Belts are extremely easy if you put on the ac belt first i made a boo boo in putting alternator belt on first whoops

I think only one word can sum up the space with two child seats... BIG!!!!

Could the factory ecu re learn itself and try to adjust for the max rom

not ebay http://www.jauce.com/auction/210368316 current bid 40,000yen impul ecu taken off 2002 250t rs four v

Ive found a set of wheels i like personally i had never heard of brand before but tyre shop pointed me in this direction. Niche wheels NR10 18x8 comes in +35 +40 and +42. Guy at shop said +40 would be the way to go. Im not sure as there is a bit of talk about 19×** and offset but not much about 18". Im looking at 18" to gain some sidewall height for a bit of a smoother ride

Jspec will give you an rough idea of total costs including compliance and registration in your chosen state .. online

Negative on the launch yet. I thought it was impressive as it was. Am i in for a surprise?

Just did it with a normal switch. On thinking about cruise control on off switch i would be limited to 30% throttle for the whole duration if i used the cruise control on a long drive may have been good for fuel consumption but i will never know

As im not one for cutting up factory wires and get plug in parts. It has come time to bite the bullet and do the brake cut mod. I am looking at doing it another way than what has been discussed previously. As my car has cruise control im looking at finding the wires associated with the on off switch on steering wheel cutting and terminating wire on the body side of ecu and connecting ecu wire to whichever cruise control wire becomes active when switch is turned on. If that does not work i have a switch i can solder in and run it to glove box

Excuse ignorence a positive offeset pulls wheel in whilst a negative offset pushes it out ?