Jump to content
SAU Community

bilbo117

Members
  • Posts

    303
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by bilbo117

  1. hmmm mine doesnt fit will post up photos 2moro arv.... maybe my cars bent?
  2. hey mate, im interested in an rb25det air flow meter if you have one?
  3. I'm on a list!!! Cakes and pies cakes and pies! :sorcerer:
  4. how much would postage be to 4680?
  5. hey guys. I have repeatedly used 10w-40 penzoil in my car but I can no longer source it. I live in tropical queensland, and because I have absolutely no idea about oils, im wondering what I should now put in it. After reading through here, many people seem to be using 5w-30, 10w-60 etc. Is it ok to change to this? Ive always looked for a 10w-40 blend as someone mentioned it was what nissan recommended for there motors after a couple of years. I give my car a bit sometimes, and I always allow for proper warm-up. So with this in mind, Can anyone recommend a decent mobil or castrol etc alternative to the penzoil I used to use? Should I Just for out the money for motul 300V 10w-40? Thanks for your help.
  6. interested if u can post a pic of an r33?
  7. Hey mate, I have a decent set of 3 piece 16 inchs dressed with some cheap tyres (firestones) and im pretty confident they handle better then my new 18's. I recently purchased a set of 18x8.5 and 18x9.5 rims for me car dressed in Nankang 235/40 and 265/35 on the rear. These tyres are horrible. The only thing i like about them is they seem to be a little more predictable then the 16's. My main issue with them is stopping power in the wet... mine lock up quite easily. By the way, mines a gtst not a gtr didnt see that bit.
  8. love em all.... but 2 and 6 tak the cake for me! 2 because of the racing 32 and 6 because it looks great and is simplest. both of these look real flash!
  9. is there anyway to display the ambient in an r33??
  10. So youve unhooked it and it still reads 3 psi? clearly its faulty. or somehow the needle has rotated on it? but you say that it still reads relatively close to what it should be while driving. so i doubt thats it. most mechanical boost gauges are a bordon tube arrangement. once they become stressed (isn't hard to do) or old, they become inacurate and don't return to zero. get rid of it.
  11. What do you mean, where is the "electronic ignition"??? Alls you will most likely need is your tacho output and power...
  12. yes, thats what i also think. one side of the spark plug is grounded through the head. so the primary side of the coil would have its 12v inputs which are switched. and the output (secondary side) would be on the electrode and the block? that makes sense to me.... anyone else? Which means to measure the coil, you simply disconnect the plug and measure the primary winding?....
  13. trex101... you seem to know your oil... do you recommend motul 4100 turbolight 10w 40?
  14. hmmm... doing this kind of stuff at work (not car related however), id be more inclined to remove the coil and check that way. the nissan workshop manual will have correct resistances for testing coils, yours do sound about right but...
  15. I once had no cat. adding a standard one again is like getting some pliers and crimping the end of your exhaust flat. feels like a huge restriction. as craved said, you wont look back after a high flow cat
  16. cheers, just sourced one from kudos motorsport! hope they havnt stopped making them.
  17. Hi, R33 gts-t 3 Inch exhaust turbo back, pod filter and boost controller set to 12 pound. Est power - 175 rwkw 60 ft- 2.098 1/8 ET- 8.845 MPH- 81.818 1/4 ET- 13.624 MPH- 102.975 Tyres- Bridgestones unsure of exact type. 225/50/16 Fuel- optimax (no bp ultimate available here ) No nitrous. Video
  18. hmmm.... What is the difference between a "BCPR6ES" and the "BKR6E-11"? other then the gap difference, they are both copper plugs with the same heat range correct? I bought the BKR6E-11's after i found my local shop didnt have the normal plugs in stock.... however, the BKR6E's have the same number as the iridium plugs without the prefix, and were listend under the performance column. can anyone shed light on the diferences?
  19. hey mate. I consistently get this noise if my oil level is running low. Cold mornings amplify the problem. I would double check that oil, and if it isnt near the high, top it up. cheers!
  20. hey mate. I had exactly the same thing happen. The are 2 weird bolts holding everything on so You will need some security bits to get the airbag off and pull everything apart. i found my horn part had actually broken and was just dangling round inside the wheel. it wasnt really fixable. Just disconnect that battery. Good luck!
  21. Yes I had already searched there... and they claim its a discontinued item and there price is set at $4,700... no joke...
  22. hey guys, Is anyone here willing to sell a nismo key blank to suit a R33 gtst? Cheers, Bill
  23. Yes i should have mentioned that also, theyll make a noise if you hit almost anything without preload on the springs.... you need to compress the spring a little by winding it shorter.... otherwise the spring kind of bounces in its seat? how much preload is good does anyone know?
×
×
  • Create New...