AlexCim

Ian, get back to work at work! The 2nd one is a LOT of driving. This is coming from someone who drives a lot too... I think it will be too rushed, from one spot to another.

What about a driveline conversion at the same time? RB25DET AWD R34 GT lol...

Nissan parts costs change cheaps based on location etc. Melbournes Australias biggest port, so its porbably cheaper here as maybe it all gets imported through here? Iono

Me and about 5 (MINIMUM, aka, they are the ones I personally call) other cars regularly meet EVERY friday night. East, West, North, South, Gippsland, Healsville, Portsea we do it all. We normally meet in the East somewhere though, around chadstone/glenny/fountain gate (Basically, off the freeway) Fridays are my "driving" nights, I NEVER do anything other than cruise. If you want to do something on any Friday night, PM me for my mobile number/MSN contact and ill make sure you keep you posted on whats going on. Always better to have more contacts to call

Me and about 5 (MINIMUM, aka, they are the ones I personally call) other cars regularly meet EVERY friday night. East, West, North, South, Gippsland, Healsville, Portsea we do it all. We normally meet in the East somewhere though, around chadstone/glenny/fountain gate (Basically, off the freeway) Fridays are my "driving" nights, I NEVER do anything other than cruise. If you want to do something on any Friday night, PM me for my mobile number/MSN contact and ill make sure you keep you posted on whats going on. Always better to have more contacts to call

2JZ no shit!

Ill try to put my S1 one on my S2 grille tomorrow And the different grills in the S1 dont interchange unicorns. I was going to give mine to muck but it didnt fit the slotted grille vs my old criss cross grille.

Disposable income is the best ey Counter meal is fine. Luke, I am going to want to talk some business at the same time too, given that ill be down there anyway, if thats cool?

Just call up your local Nissan Spare Parts, tell them your VIN and say you want to buy some oil filters. Then they will give you a part number/cost. My genuine nissan filters cost me about ~$7 each. Gone up since last years ~$6

Yep, got the car back friday, 26th is fine for me too! GOR would be good, why not. Good BBQ spots around there Munch? Waterfalls etc? Early start would be best for me too on a Sunday. How about we have a pre-meet somewhere in Melbourne, say somewhere like the BP outbound on Princess Hwy at like, 10:30 (There is a massive carpark for trucks etc), then we cruise down to another meet point near Anglesea (So the Geelong and GOR boys can meet us there), then off to whereever for food, relaxing and chatting? I've got a portable BBQ that I could bring, food, drinks etc not a worry in a wagon Maybe make it all the way down to Lorne, then there is a road up to Colac from Lorne that isnt bad, unless Luke you suggest something different?

Id probably say this is your best bet mate. All the guys here are using these coolers, ive got 1 left. http://www.skylinesaustralia.com/forums/in...=105610&hl=

Darrin, its too late now, dont worry, I am getting an auto elec down here to my loom and he has sourced plugs from a wrecker here anyway. I just want the car back this weekend, all working and sweet, so Ill just pay the 150-250$ it will cost. Keep the plugs for anyone that needs them in future, the plugs that I need are, well...all of em

After tomorrow is good for me

raggyy! on SAU-Stagea now ey?

Guys, I need an S2 VIN number so I can look up the part numbers in FAST for the headlight plugs for my S1->S2 front conversion. If you dont feel comfortable posting your VIN on the internet, can you please PM me. Cheers, Alex

ACV30 Camry Sportivo with a 1MZFE V6 in front of a 5 speed manual. Makes 147kw at the fly wheel, tops out at ~5500rpm in fifth at ~220-230kph Not sure on the 0-100 but definatly will pull a 1/4 mile time around the high 14's, maybe low 15's, which is pretty quick for a Camry IMO. With the manual box has some hardcore traction issues in the wet, with new tyres it frys 1st and 2nd, spins 1/2 of third too. In the dry, will comfortably loose traction at 60kph after a clutch popping. Only gripe I have with the car, has really strong oversteer, yes, oversteer, tendancies on high speed sweepers and also under braking the rear comes out a bit. Understeer on hill climbs is also non existant, apart from corner exists in the wet when the wheels spin and the car just floats, but thats controllable. Not too bad on the fuel, ~9's on the highway and I do around 15's city, but I drive with lots of RPM.. Definatly reccomend a V6 manual Spotivo to anyone that is looking for a very decent performning, comfortable, NORMAL family car.

Thats cheap as balls, you told em about the mods? Even my Camry with agreed value 22k is $1100 full comp....A CAMRY!!

20k Agreed value, $4200 for full comp for an 18 year old with highflow, exhaust, cooler, boost and suspension work Third party, no fire, no theft ($600 alarm), $403 a year FTW

The difference comes from the fact that the wastegate arms are welded on different angles from R32's to R33/34's. (as in, on the turbo, the little arm connected by the rod to the flap (wastegate)) You wont have much luck with an R32 actuator on a 33/34 turbo as it will just be on too much pretension, resulting in massive boosting like you are seeing. (I think, at least, that makes sense in my mind) What you can do if you want to tighten your actuator spring is to drill a hole closer to the diaphram on the actuator rod, so you would have two holes next to each other, the stock one and a tighter one. The tighter hole, if right next to the stock one, will boost around the 9psi mark id estimate. This would be using the NEO actuator. I have a drilled, r33 actuator on a turbo thats got an r32 actuator arm, and I boost around 9psi minimum. THOUGH....honestly mate, Jaycar IEBC is the way to go... or at least just a "TurboTech"

When ever, where ever, ill be there Just not a Friday NIGHT, or anything early Saturday (Normally out until ~4-6am friday nights)

user "ian" is also a victorian, the blue S2 manual.

Muahaha, we are all stealth lovers here Id rather just give volvo drivers a bad wrap , keep the Stagea name clean haha

I will be selling my grille to Qikstagea but if he doesnt want the unicorn with it, ill sell it for $20 for an S1 grille..

Good condition front passenger quater panel for sale. it is currently white, but a little scratched from when being off the car, so it will need to be sprayed anway. Panel is completely staight, there is no problems with it all. PRICE: $250 + postage The panel is $550 new from Nissan UNPAINTED. Will post up photos in a few days

I have left the unicorn stickers on the windows, and put an SAU:Vic sticker on each side. As per my sig, that is all that i've left.