Jump to content
SAU Community

Keeper

Members
 View Profile  See their activity

  • Posts

    565

  • Joined

  • Last visited

  • Days Won

    3

  • Feedback

    0%

 Content Type 

Everything posted by Keeper

  1. Keeper
    still searching
  2. Keeper
    thanks
  3. Keeper
    As per title, looking for a catch can I can swap out the radiator overflow and the can for, R32 GTR no battery in front of car so space isn't a problem. Have seen the justjap ones, but they are designed to remove the washer bottle
  4. Keeper
    what about the front solenoid, did removal of that cause any problems? what I've done in my bay
  5. Keeper
    Just to resurrect a well old post, if I remove the front and rear solenoids form the HICAS system do I need to modify the loom to not screw up the power steering? I am more than happy with the routing of the front hoses, just curious about the electronic side of it all.
  6. Keeper
    I want to remove the factory boost control solenoid which is still lingering in my engine bay after I put in the new boost controller, I used to have it in there sitting unplugged to hoses, but connected too the loom, does it need to be in there still?
  7. Keeper
    that will be awesome thanks!
  8. Keeper
    Thanks for looking anyway. BUMPY - Still needed
  9. Keeper
    dont think so, you can get that rear cover off with about 2 mins labour tho
  10. Keeper
    can you confirm it is a 3 screw sensor unit by taking a photo of the back of the odometer assembly under the rear cover please? i have purchased a couple units now and neither have been as advertised
  11. Keeper
    Still need this guys, ignore the email and sms me on 0419027124 or email byrnesvictim at gmail
  12. Keeper
    MD Spares kit is cheap, I think justjap sell them a few $$$ cheaper. A friend is assembling the engine, standard compression pistons, the block was cleaned up but I dont remember being told a heap was shaved off it, I want to run around 400kw when finished with this motor so I think I will get the metal head gasket to allow safety margins.
  13. Keeper
    On my CP piston spec sheet bore is listed at 3.406 3.40600 inches = 86.5124 millimeters Should I purchase a 87mm head gasket?
  14. Keeper
    MD Spares (03) 95530388 Melbourne Roughly $360+GST for nissan gasket kit Roughly $250 inc GST delivered to QLD for MLS 1.3mm Head Gasket (Metal)
  15. Keeper
    If PowerFC has hand controller please txt me 0419027124
  16. Keeper
    At what horsepower should you look at a metal gasket? Or is it just a taken that if you rebuild or head off you should???
  17. Keeper
    use a USB serial port emulator, I use one on my CONSULT cable
  18. Keeper
    if they werent damaged they would have gone back in, the edges have scrapes down them
  19. Keeper
    http://conceptrends.com/2008/06/18/alien-furniture-for-fans/ not what I was looking for but these are cool
  20. Keeper
    What are some ideas to make use of my RB26 pistons and rods I got lying around? I'm thinking something along the line of the support for a table by bolting them onto a bit a metal tube in a V6 orientation and welding legs on.
  21. Keeper
    they new audi S5 has a display that lists radio stations, in face so do most new european cars, and maybe even the new GTR? if its okay for them to display radio station info, shouldnt be a problem for you
  22. Keeper
    we almost contemplated hooking a yoke and rudder pedals up to a copy, the I/F is great, if you want to get the most out of flying like a real play, set the virtual cockpit and look out over the front with just the top row of instruments, you dont need most of them to fly anyway and it makes bad habits
  23. Keeper
    got a number i can yell for a price?
  24. Keeper
    A 1.2mm Tomei metal head gasket and in/out gasket kit with a nissan basic engine kit should do the job then? Thanks Nismoid, I think I drop it at the tuner by trailer after it ticks over
  25. Keeper
    hmm deff sound like the best in tank option for no dicking around, need to source one now...
×
×
  • Create New...