Chris Rogers

I think you are special. still no access for the plebs.

not quite. someone flick the main switch

sold. send me your address pls. (its a LOT cleaner than the one I have.)

these are factory items. designed to fit the rear tray of a D40 or D40T navara. I have 3 of them. price is negotiable but chasing $150 each. these are NEW (with a lot of dust on them.) can post more images as required contact me onthe number below if interested. will post interstate at buyers request via E-go couriers. these will flatten so they can be boxed quite easily.

ABS - unit - can pick up. got a pic of it [email protected].

ok - do you own (and know how to use) a multimeter?

main IGN relay is above the fuse panel inside.

I see what you are doing. once suggestion I would make with that auto though is a SERIOUS trans cooler for it. if that box is anything like a subaru box (both are jatco) then a rebuild on it is over $4k.

yep your idea is correct. most of the time speakers come with instruction sheets. may be a wise move to have a read of it.

correct me if my wiring is wrong. blk/red =+12v the other side will show 12v with the engine NOT running. if you get it turning over with a niod light then that light should flash. I would be checking connections myself.

www.carmenimports.com.au call him.

R32 - golvebox - I'll take that too.

25 head - if you have everyting to make it complete I'll take it.

when installed properly - yes its not a bad unit.

oversea for big bits - local for smaller ones - local is metro nissan in windsor O/S - company I do a LOT fo business with in Nagoya. FAST - older version floating around on the net. as for the shop current FAST version - I know someone.

see PM.

daniel, ta! ok this is a set of PDFs I knocked up. these are for the door seals and the rear side panels. when looking for part numbers I found these were a bit hard to find so for everyone elses sake they are posted here. R32_doorseals_image.pdf R32_doorseals_parts_list.pdf that covers the entire side. so door rubber trims,body rubber trims, new 'skyline' sill panels,clips (which always seem to be MISSING!) side window trim, lower side trim. these are done fro trim code G in my case. the rubber items ARE NOT cheap. the window trim is ($160 a side.) I'll add a few more PDFs later. I have a book (as mentioned earlier) now with every trim part I need to replace on this car so my life will be a bit easier when it comes to buying things. I did a parts blowup of a R32 GTR N1 (yes I have done one - I just didnt realise it!) front end and thats where I'm starting with my body parts. next photos will be of new parts. (and a empty wallet. )

no probs.

thats a fair point as well. I thought those ran one belt though.

electrically they are differnet I can tell you that much. in most of the S2 ones I have worked on they had smart entrance fitted. the S1 did not. dash cluster and main panel differ - there are otehrs but htose ar the ones I can name off from memory.

looks familar to me - mine is the same. have not bothered to crack the engine going to drop a RB25 or RB25/30 in mine.

had a scan tool on it yet?

thanks to the two people that sent me info via PM. it was quite helpful.

alternator is a possibility. got a multimeter? 13.8-14.3V on the battery?

looking for solutions here. the hicas light has been pulled on my car for some reason. what USUALLY goes wrong with this system? looking at what I have it derives the speed off the wheel sensors and speedo. correct? sppedo cable appears intact. before someone says LOCK BAR - no I do not want one. car came with rear steer and I would like to understand it and get it working.