skidkid

Niiice. 200+awkw with no hiflow turbo. Is that the bonus of manual and power fc?? Happy boosting!!

Gor, Niiice. What suspension has your wagon got? What center of hub to gaurd has she got? Does it bump steer/ hang off the bump stops?

Come on peoples, I am hang'n out to buy a 260RS. Surely out of 101 lookers there is somebody that needs to buy our ride!. You will not be dissapointed. Do you know what you are missing out on?? I may sell the wagon with the mods!!?

Niiiiice!! Love your work!! Go the Stagea.

Pinch the exhaust off your gts-t plus extension. I bought a sec/hand 80mm GTR exhaust and fitted to our S2.

Got more boost!!! Yeehar!. Changed act. lines around. Went for a drive and started adjusting. Smoothed the boost climb up to 10lbs, just need to trim to keep at 10-11lbs and keep spick to a min. When my 'Multi ckecker' turns up I will get in and have a go at tuning the SAFC I have hooked up.

I have read through 2/3 of the 22 pages and found a few different load points listings. Looks like I will have to find and sort out the vent/restrictor then make some trial changes.

Alex, Are you able to quote your IEBC load points please.

All hooked up. Runs upto 8lbs as it did with high boost mod. Number 2 led flickers and no. 3 stays on when running. No. 2 the sus one. Installed SK's load points to start with. Does anybody know were the resricter is in the S2 solenoid lines and what sizes. Has anybody successfully fitted a IEBC to a S2 following SK guide. Not bagging SK guide, just wondering if any difference for S2 because 22 pages will take awhile to read through.

Has it happened at idle? If you are able to dissconnect alarm yourself, do it and start it up/ take for drive. I worked on an RB30 last week that had a similar problem for months. I didn't find the cause. All I did was make sure dist., coil, sensor wires etc. were clean and fitted tight. Last I heard it hadn't missed a beat!! Hope you work it out easlily.

I am in the middle of fitting a Jaycar IEBC. I found SK's Pin locations and am upto wiring solenoid (black earth). I have done all the connections at the computer. I had previously earth solenoid for high boost. Do I remove that earthed wire, then cut wire at computer (pin 104), to run solenoid earth straight to IEBC? Any helpers to clearup please or should I PM SK?

So manual S1 and S2 plus 260RS has GTR rears. Ok cool!!

wol., Why won't rear shocks fit? I believe S1 and S2 shocks are the same.

Me?? If so I am sorry I have bad grammer but I was only asking!!

mike, Are you running 18"x9" and what tyre size? Any clearance probs, inner and outer? My wagon is lowered a bit!

EGA4IT, Do you know what offset your wheels have? Trying to workout ideal.

Ska, Was the comp. test only down because you had some on your hands or does it have some symtems?

EGA4IT modified the airbox feed/snorkel on his.

Is anybody with Stagea using a Stainless low mount turbo manifold? I talked to an avide Nissan user today that has used one on an R32 GTST and it made a good increase in mid to high revs. Due to weight of Stagea is that not really applicable? Did a search earlier for ideas, no one with a Stagea popted up.

marc2, I know we are going back 6 months but did you have any pics of gauges and front panel before fitting? Has anybody nutted out how to fit the R32 GTR 3 din gauges? Can I modify the standard front panel mounts or just make up new panel? Has anybody seen S2 Stagea manual 3 din gauges 4sale?

Recieved mine on Tuesday arvo. There are light scatchers in the paint, where they stacked together? Top job on the cutting out!. Went and bought some Stainless button head cap screws to finish off the job. But hang on, I had to drill another hole!! It is the auto tranny cooler mount bolt. Refer to muck's pic. Ran out of light last night to finish fit up. Cheers for finally getting them finished and sent. Everybody have a Merry Christmas and Happy New Year!! Happy boosting!!

There is an RB25T engine at my work at the moment. I measured up the crank for size and it has rb30 mains and sr20 bigend sizes as standard. The RB25 be's are smaller than std. rb30 be's. I can quote std sizes if needed. For an RB30 you can use Chev 2" bigend rods (eagle/ carillo) and grind to suit (-.030'), or just buy a set of good rods to suit your application! I can't quote compression because I don't know the rod lengths. My 2 cents.

Hang'n for mine to!! Hopefully it beats the big guy!!

Wanted a Jaycar Boost controller, cable and hand set. Assembled and running! PM please.

We have had our 98' Stagea wagon for just on 12 months. We took a holiday to sunny Queensland and drove it back. It is a great alround family wagon. It only has 62,500 kms on the clock!! It has an R34 NEO engine, 4 speed auto with tiptronic, power steer, power windows, twin sun roofs, air con with auto climate control, full tinted windows. It will be sold stock standard for $22,500. It was easy to insure. Through 'Just Cars' or 'Shannons'. See photo in signature. Located in Launceston Tas. PM for more details.