skidkid

Why??? Because the Navara will be a dualcab ute, for the best of all 3 worlds. To carry the family(3 of use now), put junk in the back and also so it is not a slow ute!

So how much up front? Is it $300.00 plus ????? and I pay for my postage? I'm thinking I need to buy me one!! Go the Stagea!!!

2-3mm with std flap. Every bit would have to help. Can't hurt to try, save being held to 10lbs.

Can anybody quote the head chamber 'cc' for both heads. If they are the same you wouldn't really need to change thickness unless you want to change compression. my 2cents.

G'day, I have an R32 turbo I split in half and ported the w/gate hole but needs bigger flap made and fitted. I have a piece of stainless to turn one up. Without replacing flat you would be lucky to port 2-3 in diameter out of w/gate outlet hole (going by R32 turbo).

As asked. Has anybody seen a dashmat for Stagea? Help save the dash from the sun!

A 26 head is not a cheap option! Try Extractors and K&N panel filter first. Maybe a couple more deg. timing and/or Adjustable cam gears.

dm4, Is that a valvebody/ shift kit up for grabs you have?

Are the Bilsteins complete with springs and tops? What rate springs? How many circlip grooves do the shocks have on each one? How old are shocks? Got some pics? And how much for all 4?

Can I pay for an exchange, change it over once I recieve, then send my std one back to MV? Or is that, I will recieve a refund once I return my std valve body to MV?

Single turbo version.

I am looking at buying a Navara V6 and if the motor died I would fit a VG30t. Anybody done such a convertion? Any tips? What extras apart from motor are needed? Would I need turbo computer and AFM or just use an Apexi SAFC? Anybody know of some VG30t spares?

I am looking at buying a Nissan Navara VG30 V6 2WD. If it is an auto I would want to change to a 5speed. Does anybody know if the 5speed is the same as say a RB20, RB25, RB30 gearbox? Any help greatly appreciated.

What year? I have a 98' which has red writing. If it is running 8 lbs all the time it is reliable enough.

From memory, the 'snow' button, when pressed starts the car off in 2nd gear as opposed to 1st for better traction/grip in snow/slushy conditions. Perhaps ask Alex, recon his got a work out a couple of days ago.......

Bass, If you were brewing 'Bourbon' it would be aged enough to almost drink!!!!!!! Just add a liittle 'Dry'.

I take it you ordered rods to suit 2" BE's. You need to buy .030" under be's bearings (ACL) for 2" rod, then you have .005" to grind off be's. Bolt bearings into a rod and give .0025" clearance, from my experince only. Can't remeber what the be rod width is like comparing the two. Machine shop should be able to modify that if need be. You will also need to compare rod pin sizes. Have quoted here because I grind cranks for a killing (employed to). Hope this helps.

Tidy !!! Like the new wheels. Is it just the pics or are the rims black on the inside. Where did you buy them from?

When we were looking at buying the Stag (October/November last year), Sheri made some calls and Shannons told her that because the car would be a daily driver they didn't want to insure it. It's currently insured with Just Cars $700ish for the year and $1100 excess......that's based on Sheri, 26, rating 1, and we're in Tassie too........

Fellow boosters! I fitted an R32gts-t wastegate actuater to my S2 (neo) Stagea 2day and hit 15psi with light throttle. I have read that the 32 act. holds 10psi. When I removed Neo act. I lined it up against the 32 act. and a steel wheel 33 turbo I have. The free length of all the act. is the same. The mounting point to w/gate flap on Neo measured the same as on the 33. I can't work out how I ended up with 15 psi. I am able to make Neo act. arm adjustable to screw up to 10-11 psi. Would there be more gain/ control buying atleast Jacar Boost controller? I did do a search to try and answer my question. Go the Stagea!!!!!!

It's a shame I got so exited about a S2 Air Def. and paid for it round 4 months ago as you ask for!!!! I am getting pretty disheartnd that they r taking so long to 2 turn up. I hear you asking people to hang in there but r u prepared to refund until u have a finished product??? Best go watch FHM Girl next door.

Has it already been tweaked or is that an option?

G'day, Would you be willing to sell just the MV valvebody and post?

BJ. Have you got an update on Def. (S2) being it is Monday!!!!