R.3.2.G.T.R

Custom GTR Front Pipe twin 75mm to 80mm with no lip, measurement for internal diameter, very well made, in excellent nick, no scraps/dents, not equal length type would suit tomei/hpi dump pipes better due to no stepdown/lip as most other front pipes have smaller twin pipes entry was planning on keeping it for when i change out my hks split dumps to a tomei/hpi item but not happening anytime soon as a reference: blitz 70mm inlets and 80mm outlet hks 70mm inlets and 85mm outlet jjr 60mm inlets and 76mm outlet apexi 60mm inlets and 70mm outlet mines 70mm inlets and 80mm outlet trust 70mm inlets and 80mm outlet $350 firm pickup only (western sydney) Custom Tomei Poncam to suit R34 GTR 9.25mm lift approx. 270 degree duration Cams were custom made by Tomei for Tommy Kiara full R-Z 530PS engine package. The numbers on the cams are A2692N and A2692R. These are little too big for my current gtss turbo setup. I will provide buyer with additional info given by previous seller for setup. $500 pickup (western sydney) pm me

all sold

If u do separate, im interested in the greddy intake kit

still got rear rotors? how much mm?

Shannons

Bought this as part of D2 group buy, sold the front kit recently as it fouled on my deep dish rims, now selling the rear kit as well brand new in box Rear 330mm (includes factory handbrake compatibility kit, normally $250 extra) Comes with ADR Approved Brake Lines and Street Pads Anodized Black calipers Chasing what I paid $1800 slightly nego Located near parramatta Pickup welcome

require part no. for heat exchange unit seal and the bolt seal that holds it - 89 GTR

what size rear rotors?

also read somewhere there's an option to switch between the 32 / 33 sensor via PFC handheld but i do not see this option - running PFC Pro

hi guys, recently replaced both O2 sensors on my 32R with new titania ones as my old ones appeared stuff - read approx 3v steady IIRC anyways, with the new ones, i have small voltage movements but both are hovering around 1.6v now i have confirmed the wiring order on the connectors by looking at other ppls setup and loom back from the connector looks stock std again to install my ntk ones, basically involved, de-pinning one of the connectors for a square plug, otherwise straight plugin currently have O2 feedback turned off in PFC and getting my reading via PFC handcontroller any ideas where its going wrong? would love to get some economy back

appears to be Fpcm - fuel pump control module, varies voltage on idle and normal driving

very nice car, too good for the road back home lol

.

pm sent

do u mean boost solenoid? I have one spare

Selling my new D2 brake kit from groupbuy as it does not clear my deep dish rims if you looking at upgrading without the wait, this is your chance 356mm Front / R32 GT-R - Street Pad - Anodized Black 330mm Rear / R32 GT-R - Street Pad - Anodized Black Front 356mm - $1800 ono Rear 330mm - $1800 ono (includes factory handbrake compatibility kit, normally $250 extra) includes ADR Approved Brake Lines (normally around $150 / $250 ($250 for front & rear) located in western sydney near parramatta groupbuy thread http://www.skylinesaustralia.com/forums/topic/413182-big-brake-group-buy-skyline-silvia-stagea-wrx-evo-all-makesmodels/

i used 8g as i had few meters of spare cable, also make sure +ve and -ve are the same gauge, my one just plugs into the existing pin, wires inside the tank hasn't been touched

R32 GTR/GTS-T Dash Pad Sellimg my old dash, has a very faint lift on passenger side and a small split/lift above the cluster portion, see pics Comes with both middle and passenger side vents, one slat broken on middle but inside bit so not visible front on price $150 pickup firm (near parramatta)

so what turbo's do you have?

Sard hi-flow, what size inlet and outlet?

R32 GTR/GTS-T Dash Pad Selling my old dash, has a very faint lift on passenger side and a small split/lift above the cluster portion, see pics Comes with both middle and passenger side vents, one slat broken on middle but inside bit so not visible front on price $150 pickup firm (near parramatta)

Looks like ill be selling my front and rear brake set and it wont clear my deep dish rims 356mm Front / R32 GT-R - Street Pad - Anodized Black 330mm Rear / R32 GT-R - Street Pad - Anodized Black pickup only in western sydney, pm me

got a brand new black grill, but not sure which series, will confirm

got mine today, awesome piece of kit thanks aaron and ash for organising

pretty sure they wont be, u could try HEL brake kits that was previously done as a groupbuy, they are ADR approved