Clint32

yes the 33s have a electronic system, just remove the rack and replace with the adjustable bar, unplugging the hicas does not seem to have any adverse affects

yes Steve im sure ive told you i can do the hicas lock, $150 fitted.

i have 1 piston avaliable, out of rb25det, measures up to spot on stock size email ahrns@senet.com.au if you wont it

yes i agree sydneykid, ill have a set as well and may even donate mine for you to copy if you will need some

ha ha, we will see mate

yeah joel i have a flywheel off the rb20, have a os tripple going in so its not needed, PM me if your interested When finished i hope to have the power that these 33s have but with about 200kg less weight to move around

yeah selling rb20, building rb25

tailshaft sold, all other items still fs also have std exh cam gear rb25 $20

if you find some different valve springs let me know as i deffinately wont to upgrade mine. Also the rb26 ones are supposed to be a lot better and streight fit

engine is fine, was going hard with the setup it had

I have a std rb20 clutch but the plate is pretty stuffed

yeah but the std turbo manifold are the same, the aftermarket ones may not be the interchangable

they appear to be exactly the same

R32 93 Rb20det, comes complete with manfolds,coils, injectors, all sensors, has no wiring or turbo $500 SOLD Blitz stainless manifold for rb20/25, has t2 flange and pipe for external gate, good condition $700 RB25 crank and rods, very good condition $250 SOLD Adjustable caster rods, suit r32,33, s13 etc, new with quality rosejoints $250 r32 gtst exhaust cat back, 3'' mandrel bent, with polished stainless muffler, $450 Rb25 injectors $80 r32gts bonnet, burgendy, very good conditon, $80 R32 rb20 tailshaft $50 SOLD rb25 crossover pipe with BOV, $60 std rb20 flywheel $50 SOLD Rb20 det bottom half inlet runners $50 stock rb25det turbo exhaust manifold $50 email ahrns@senet.com.au for pics/info

ill try, you will wont about 40psi of air pressure, the thinners amount will depend on the paint type. You should be able to get small spray gun for under $50 that will do a decent job

yes i will sell for 250 plus freight

im after a set of pistons to suit a rb26 so i may give him a try

yes they are the same size and interchangable

yes, because the rb26 has a different crank which gives it more stroke the pistons are shorter from the pin to the top, so i believe if you use gtr pistons in a rb25 it gives a very low comp ratio

i have one good piston if you find some others

i take it they are the non turbo 4 stud wheels, and 16/7 means 16'' wheel 7'' wide. if not and they are r34 gtt 17'' wheels and your other sale falls through i will buy and im in adelaide

i would be interested in just the comp and loomif the price is right

they may be sold, ill let you know if it falls through

RB25 crank and rods from a series 1 rb25det, in very good condition with no marks on any bearing surfaces, good for stroking a rb20. $300 email ahrns@senet.com.au if you are after pics/info

sorry sold