Jump to content
SAU Community

Recommended Posts

Hey,

Just wondering if anyone has had any real difficulties drifting their stock cefiro?

Mine has everything else setup eg mech diff, coilovers, adj suspension links, clutch etc however ive run into some cash problems and cant afford any major power mods for a while. i dont wanna waste time and money taking it out to a practice day for it to be uncompetitive and a handful to drift, but also i dont want it to really sit around while i save up for mods.

engine mods so far only include a cat back exhaust and hybrid front mount. rest is stock. how much boost can the stock turbo handle and for how long under drift conditions?

cheers

Aden.

Link to comment
https://www.sau.com.au/forums/topic/100037-drifting-stock-engined-cefiro/
Share on other sites

yeah what softy said, you don't need that much power to drift if you've got a nice suspension setup and diff, stock RB20DET's should give you enough oomph. The only gripe I have with ceffy's is their boat like swaying. Make sure its got a low center of gravity and rigid suspension and you'll be fine.

In any case you should give it a go. It'll give you a feel for the car, and you can then tweak the suspension till it handles the way you want it to. A lot of guys bleet on about "teh ultimate drift machine" which they're building up, but have never seen a second of track time.

cheers guys for the responses, ill definately be out at a practice soon to give it a go as soon as i can source some tyres. anyone interested in some 235/45/17s i got, or willing to swap for some 16 inch rubber?

any ideas also about how much boost thru stock turbo?

Stock rb20 in the cefiro would probably be your SAFEST bet.

Just wind the boost to say 10psi and go for a dyno run to make sure it isn't r+r'ing or running lean.

A lot of guys bleet on about "teh ultimate drift machine" which they're building up, but have never seen a second of track time.

Shhh.. tell noone.

go for it mate, youll luv it, if i were you though id go on a quiet search for a r32 rb20 turbs(slightly bigger) or even a rb25 turbs, as someone mentioned above though youll have lean out issues though untill you get it tuned but i would suggest 10-12 psi and go n buy a dump/front pipe :D (rb's sound great with screamer pipes :D )

i have no turbo and auto and i still make it drift, seriously drifting isn't about how much power you have or suspension it's about the heart you have n how much you can stick it to the MAAAAON

  • 2 weeks later...

They drift really nicely with standard power if you have a good set of coilovers and a 2 way, and a set of pineapples help too.

After some mods and a few gearboxes later I had mine running 195rwkw and it drifted really well it was an animal. RB20s sound really nice with a 3" exhaust with no cat or muffler :D

  • 1 year later...

Just got myself a stocker imported well almost completly stock, Came with jic all round,3" zorst, cuscu sturt brace and had been converted to manual i pressume because of the dash and the cruise controll switches, Engines a standard rb20det and shes a nice responsive handeling car i was really impressed didnt expect that much from it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...