Jump to content
SAU Community

Recommended Posts

I recently got a new pair of tyres at 150 dollars a piece, which are meant to be pretty good quality for the money, and i havent looked back.

i drive a turbo 33, and the sensational grip just gives u the sheer joy of driving.

I struggled on some bald tyres for a few weeks, and new tyres give u confidence, handling, and obviously safety. i highly recommend it for those of you with not so good tyres B)

Now i can barrel thru those tight corners, get reasonable traction from the lights, and flooring it in second thru a turn will provide traction loss obviously, but extremely predictable, and easy to control out of the turn.

hehe, as u can guess ive had a great night out.

Man once u get a skyline u cant look back ey. its just the best :D

Go the mighty liner!!!!

siigning out..

Soon2b33

Edited by soon2b33
Link to comment
https://www.sau.com.au/forums/topic/100075-new-tyres-are-worth-it/
Share on other sites

Tyres are probably the most influencial part of the car in terms of cornering speed, handling, and other related aspects of driving. A powerful car with shit tyres will always get beaten by a less powerful car with far better tyres when it comes to circuit racing. That sed if its only for taking off at the lites...it doesnt make such a huge differnce as it does for cornering...

My 32 has 235 on the fronts....255 on the rears.... having coilovers i have already gone thru 1 set of rear tyres in under 10 thousand k's with the original fronts which i bought it with still on there...That sed...i currently have Kuhmo Ecsta's on the fronts....and Hankook K104's on the rear...and within the speed limit (of course) through the hills....The car noticeably understeers due to the intense grip of the rear wheels in comparison to the fronts (being worn aswell as smaller).

My two cents worth...

Haha i've got the opposite problem, coilovers + hankook K104 235s on the front and the famed falken ziex ze326 265's on the back, front grips incredibly well, back barely holds the road dry, wet = forget it, may as well be running slicks...

yer, im looking forward to getting some new rear tyres

my currents are totally had it and need to be replaced now (im saving for them, 265/35/18s arent cheap)

im looking forward to grip as im a bit nervous booting it through 1/2 gears currently, never no when its going to break into wheelspin

tyres for 150 each would be absolute shitters. The ones you had on it before would be even worse. Tempe have 17" nangkangs for 130, or falcon ziex for about 140.

Those would be the sorts of crap available for that price.

For actual decent tyres, try the falken grb451 or rt615.

tyres for 150 each would be absolute shitters. The ones you had on it before would be even worse. Tempe have 17" nangkangs for 130, or falcon ziex for about 140.

Those would be the sorts of crap available for that price.

For actual decent tyres, try the falken grb451 or rt615.

assuming he has stock 16inch wheels u can get decent rubber for $150

a friend recently got dunlop sp9000's for his s15 wheels from tempe tyres for $150 each fitted which was very cheap.

Haha i've got the opposite problem, coilovers + hankook K104 235s on the front and the  famed falken ziex ze326  265's on the back, front grips incredibly well, back barely holds the road dry, wet = forget it, may as well be running slicks...

I had the same tyres on the rear of my r33 as well. Gripped 'ok' in the dry, and i lost it in the wet ;) Was probably my fault for loosing control, as once it came out i had no idea how to control it...

Took it to a tyre shop and they said theyre very poor tyres in the wet... goes to show good tyres pay off, i'm only running on nangkangs ns-II now but i think theyre even better. Goes to show, decent tyres, can perhaps even save a car.. and in my situation.. a set of work rims that 'were' perfect.

Dayne B)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...