Jump to content
SAU Community

Recommended Posts

No you should just watch it over time tho the cheap ones dont always last too long, A mate of mine brought a cheap Boost Gauge and his lasted a month. Then it started to creep off, My HKS Boost Gauge on the other hand is still going strong and it came with the car.

So I guess you get what you pay for.

Edited by 7yphon

Greddy makes a nice electronic boost gauge. I currently have one in my car, it reads boost accuratly and responds quickly. Where as my buddy had an autometer gauge that would read 5psi when the car was off :blink:

I have found the Apexi Boost gauge to be great.

But i was considering getting 3 cheap gauges, for temp and pressure, for $220 or the DEFI DIN-gauge set for $600.

I know Defi are accurate and will last for years. But i am thinking; even if the cheap ones are inacurate, you only need to know where they usually sit and be worried if this changes. But now i read that these cheap gauges do alter their readings with time :O.

Is this the case for both mechanical and electric gauges? As i am only getting the electrical type.

I have found the Apexi Boost gauge to be great.

But i was considering getting 3 cheap gauges, for temp and pressure, for $220 or the DEFI DIN-gauge set for $600.

I know Defi are accurate and will last for years. But i am thinking; even if the cheap ones are inacurate, you only need to know where they usually sit and be worried if this changes.  But now i read that these cheap gauges do alter their readings with time :).

Is this the case for both mechanical and electric gauges?  As i am only getting the electrical type.

And the Apexi ones look the best too! :O

boost.jpg

yea apexi rocks but cant find one under $275 ...

Nengun: Click Here

OR

RMS Motor Parts Pty. Ltd.

Unit 3 / 662 Whitehorse Road,

Mitcham,

Victoria, 3132,

Australia

Phone: (03) 9872 6669

Fax: (03) 9872 6697

Emails:

General Info : [email protected]

Sales : [email protected]

Trading Hour:

Mon-Fri 10AM-6PM

Sat 11AM-5PM

I would also recommend VDO. If you're not after a fancy dial face and only after functionality, VDO is the way to go. Autospeed did a review and found that the VDO boost gauge was good (Avg error of 2.5%).

To quote Autospeed :

"Indeed, VDO offer good value for money while perhaps lacking the frills and panache of some. Accuracy is up there, and thanks to the German company establishing a manufacturing facility here in Australia, warranty isn't a problem. VDO gauges are available from most outlets and the range of hardware is extensive."

Funnily enough, there is one for sale on Ebay right now :Ebay VDO Gauge

Why spend $240 on an Apexi gauge when a $80 VDO gauge will do the same without having to worry about the accuracy/reliablity of something like Speco. I'm like having Functional stuff in my car, not into bling so I bought a VDO.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...