Jump to content
SAU Community

Recommended Posts

Hey hey everyone

I'm just looking for a bit of advice, yesterday the engine in my R32 GTS-t died something shot out the bottom of the engine, a piston or something I don't know. Now because the boyfriend was driving it, he feels really bad and said he will pay for the new engine to get put in now i have the decision of if I want to put the standard engine in or something else!!! And also who am I going to get to put it all in??? If anyone knows someone good on the Gold Coast it would be great if you could give me the name!! I would be willing to go to Brisbane if I have too (though I don't really want to go to Brisbane).

So if anyone can help please do!!! Thanks

Jade. :P

Link to comment
https://www.sau.com.au/forums/topic/100886-jadles-engine-died/
Share on other sites

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

damn :P Did think it wasn't looking too healthy with the amount of blowby when I was checking that AFM problem a couple of months back.. but didn't really want to get u worried.

I think best solution may be an RB25 halfcut and go that route.. may cost $1000-2k more will add to the sellability of the car as well if you guys decide to sell it later on.

A few dudes are always after little bits and pieces for the rb20 which u can sell eventually for $50 here, $100 there, etc (head, turbo, injectors, loom, ecu, etc)

I hear J's Garage is the ducks nuts!

Even to do the wiring and computer if I want to put an rb25 in it!!! (Which I'm considering)?? That would be good if he could do that'

J's garage has access to someone who has just done all of this :P

I had a quote for a half cut of a R33 gtr 1996 to buy and to get installed for $6,000 including engine, turbo, wiring, intercooler, brakes, ummm i'm forgetting something but yeah, what do we think of that???

I don't really want to put the rb20 back in i was going more for the rb25 though I want the right person to install it!! I always get ripped when I take it to get serviced so I know i'll get ripped doing this job!!

Even to do the wiring and computer if I want to put an rb25 in it!!! (Which I'm considering)?? That would be good if he could do that'

I did this conversion myself in June last year and can highly recommend it. With the stock turbo the RB25 offers great low down punch. I wired up a 'Plug 'n' Play' loom to enable the use of the factory ECU. With a PFC and a little more boost you will have a reasonably quick streetcar.

If you do choose the RB25 option though, I would recommend looking for a motor out of an R33 and not the stagea as there appears to be a little more involved in wiring up the loom to run off the stock ECU (I looked at it recently for a guy in Perth).

I am about to wire up a loom for a another member of SAU who is going to put an RB25 in his cefiro and I will be taking pics of the process (I placed some less detailed pics of my loom in my members gallery).

If you would like assistance with any aspect of the conversion feel free to drop me an email or PM. I took plenty of pics of my conversion so I can forward them to you.

Hope this helps.

Ben

Jay, have your man go with you for quotes, especially at some places mentioned, cause as sad as it sounds some places treat women differently.

As for where I go its a little different considering they were my girlfriends mechanics before mine, and I am glad they do cause I hate wanker mechanics!!!!

If you have something bad to say about a company that has been mentioned in this thread, please pm the person with your issues instead of slandering business on a public forum.

Slander - A type of defamation. Slander is an untruthful oral (spoken) statement about a person that harms the person's reputation or standing in the community

Now that we have the correct definition of Slander posted above, I have no issue posting what happened in my case as its true, not an untruthful statement.

I have no doubt in my mine Gavin Wood knows more then his fair share when it comes to GTR’s and tuning how ever his poor customer service lack of interest and knowledge with engine conversion cars and his silly price’s makes one wounder.

He had nothing but issue’s with trying to tune a 600hp RB converted car, charged a silly amount for a SAFC tune that he didn’t do due to a bad senor - You’d think you would charge for pointing out the problem, not charging to tune a car you didn’t and admitted to not tuning eh.

From other peoples comments in person, on this site in the past and on other forums he appears to have no interest in pretty much nothing that’s not a GTR nowadays, yet he calls him self the “Skyline expert”..

Edited by Nismo_Boy
Jay, have your man go with you for quotes, especially at some places mentioned, cause as sad as it sounds some places treat women differently.

As for where I go its a little different considering they were my girlfriends mechanics before mine, and I am glad they do cause I hate wanker mechanics!!!!

Yeah, wanker mechanics are the worst! :)

I think I'm going to go with the RB26 it a half cut of the R33 1996 gtr and bought and installed for $6,000 including after market intercooler, brakes, turbo, wiring, computer (i don’t know if i want to change my computer though) and yeah!!

I'm having a look at it today!!

One of the SAU members mentioned a mech that I'm going to look into too!!!

Thanks for all the tips guys. If there is any more info you can give me that would be great.

Thanks BH_SLO32 I would be shit to do that and there is no way I would let the bf do it, and i don’t think my insurance would like that!!

Who does engineers plates too?? Would they approve this conversion??

There is no need for an engineers plate(afaik) because r32 did come out with an rb25 as well.

but, that being said, i would recommend it anyway, make it look more legit and less likely to be picked on for mods if its been done right, and approved.

as for the rb26conversion.....that is a great engine to throw into a gts-t....untill you break it, then you'll wish you got a 25....they are soooo much cheaper to fix/replace.

6k would get you a weapon 25, or a stock 26...

also with the 25 you can use most if not all the boltons you already have...with the 26 you are starting from scratch.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Food for thought, the stock oil filter thread is a 3/4-16 UNF, which has an ID of about 10 to 12mm (according to ChatGPT lol). Now compare than to an 10AN, which has an ID of about 14mm (Raceworks is 14.2mm, Speed flow is 14.27mm).  
    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
    • Add more solar panels to the array. Call the electricity company and tell them you're moving out... Live off grid electric wise
×
×
  • Create New...