Jump to content
SAU Community

Recommended Posts

Got my car back this afternoon from the mechanic. He didnt change the afm, basically gave it a check over, put it on the dyno, drove it round on the road a bit and said he couldnt fault it. Got it back on the highway and within 5 mins i had created a traffic jam! The problem is very easy to instigate, if i drive it gently and not on boost, all seems ok, if i give it some, say 1/2 bar or more, after i stop accelerating it basically looses all power, splutters, shudders i get very little response form the accelerator (if any) and if i fully remove my foot from the gas it will stall but i can keep it alive by pumping the accelerator, eventally it springs back into life as if nothing happeded. If i accelerate hard again same thing happens. Any ideas??

Cheers

Twitchy,

Sounds similar to a problem I had (and which we eventually fixed). Car would run like a dream and then, for no apparent reason, loose all power, survive a complete stall by pumping the accelerator, then after about 15-20 seconds, it would come good again and off we go. Kept happening at the most inappropriate times.

Same deal, we thought AFM, replace both (paid about $150 each second hand). No good. Changed fuel pump, checked wiring, relays, computer, CAS, spark advancer - basically everything you could think of. Mechanic would say - "I think we've got it now" after they road and dyno test - only to do it again on the way back to work.

ANYWAY... turned out to be the plug to the computer. It has a single bolt on the centre of the plug. As the car accelerates or brakes, the plug would rock - ever so slightly - and lose connection with the fuel pump pins. Used a bunch of zip ties to hold the plug firm on the edges - never had a problem since.

It's a long shot - but if it is the cause - you may not have thought to look at it.

Hope you get it fixed soon.

Cheers

Peter

ANYWAY... turned out to be the plug to the computer. It has a single bolt on the centre of the plug. As the car accelerates or brakes, the plug would rock - ever so slightly - and lose connection with the fuel pump pins.

Hi Peter;

that's a beauty, how did you manage to find it?

GTR 32,

I think it was when they were changing over the ECU (from Apexi back to stock back to Apexi) when they noticed the plug - which is actually more like a bar had a slight bow in it. I would have been stuffed otherwise - it had taken 3 weeks of trial and error, calling in auto electricians, 2 fuel pumps, etc, etc, etc when someone came across this.

At one stage, whilst at the mechanics, we couldn't start the car. Put a pressure gauge onto the fuel line and had zero pressure. Everyone stuffed around trying to work out why - no go. One of the guys leant up against the car - hey presto, full pressure.

Was driving us nuts.

Definitly worth a check if you experience any wierd stalling as described.

G'day Peter, very interesting reading your reply, sounds almost identical to my problem. I havnt heard back from the mechanic since i gave the car back to him last week (wednesday) so i gather he hasnt fixed it. First thing tomorrow i will ring him and let him know about your problem and solution. I have a feeling that it is an electrics problem due to some other strange things (electrical) that have happened in the past...he's not so sure though. I really appreciate your advice and will be sure to let you know the out come.

Cheers

Andrew

I didnt realise how lost i would feel without my car :rofl: i usually walk around with a big grin on my face, however since that fateful day last week i seemed to have lost such an expression :) (never thought i would feel like this about a car).

Edited by Twitchy
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The HG high flow is excellent, and costs about the $$ you're talking about. But it, and probably every other highflow, uses a diffeent core than the original turo, and the original Hitatchi core is quite long. So, I think it is inevitable that there is likely no such thing as a highflow that just "bolts on" with no other effort required. And the same is likely true for HG's outright replacement "bolt on" turbos (the ATR things). And the same is likely true for anything similar from elsewhere. I have no idea if the cheap Chinese/Taiwanese complete turbos from eBay/Temu/etc are as bolt on as they claim. I mean, they claim the bolt onto the NAs as well as the turbos, and we know that can't be "bolt on". But it wouldn't matter because I'm not buying a $169 4 psi turbo for anything other than a paddock basher.
    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
×
×
  • Create New...