Jump to content
SAU Community

Recommended Posts

Are you still gettng a decompression gasket? I wouldn't bother. Grepin's getting well over 300rwkw with standard compression and pistons.

shit 300rwkw!!!!

no headgasket for now as the labour to install it is more than the cost of the gasket

  • 2 weeks later...
' date='15 May 2006, 03:53 PM' post='2168293']

well, i just had a talk to my tuner and he told me i should be maybe to make 300rwhp @ about 1.2barish :

how much power are u guys making?

You sould go way past 300rwhp!!!

also don't get too down if it doesn;t make the power as every freakin dyno in this country reads different.

im not too worry about the power, as i really only want 300 to 330rwhp but im just starting to get worry that my engine may die :

i guess i just got to wait and see

You're probably looking at around 260-270rwkw @17psi with that setup and good tune, a bit worried about your chinacopy FMIC :D

And this should be fine on stock internals if you use 98ron fuel and keep oil nice and clean :rofl:

BTW, what fuel pump will you be using?

Edited by Color_Of_Green

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...