Jump to content
SAU Community

Recommended Posts

MAN you guys are gonna f**ken laugh your heads off at me :), car had a Hidden KILL switch :( its started now :) bahahaha not that it matters ITs being changed for a l28 soon! need new alternator as well might not giving any charge!

Edited by R30kc70UGE
Link to comment
https://www.sau.com.au/forums/topic/101957-r30-not-turning-over/
Share on other sites

r30 not turning over? welll its actually turning over Just not starting And if i try to Jump start it Just Kinda Keeps Trying to turn over But not start And if Not Jump starting the Battery evantually goes Dead!

battery at about 17v

Any ideas? would be greatly appreciated

thanks

casey james

SOUNDS LIKE THE STARTER MOTOR IS f**kED does it click when you try turn it over and is the fuel injected model???

Check your battery terminal connects, and the wires going to starter motor and alternator. My r30 was doing this last month, my battery terminals were dodgy even tho they "seemed" fine to me. But in the end my battery was stuffed too

Can you comprehend that 17V is too high ??

I wasn't disputing that fact, obviously you CAN'T read.

Dodgy connections will NOT give a higher reading than what the battery is putting out.

Yeah Battery Just been Replaced now its Just Clicking when i try to turn it over! :D i know Generally this is the Starter Motor But I just replaced it grrrrr.

might Just build up my Tuff na Motor and Through the engine away!

Refer to first Post, Not sure as to what it is Now Did have an idea but the No noise at all has kinda Just ruined that lol, Any conversion that are simple And Under 900 dollars as i just bought heaps of stuff for my ae71!

Refer to first Post, Not sure as to what it is Now Did have an idea but the No noise at all has kinda Just ruined that lol, Any conversion that are simple And Under 900 dollars as i just bought heaps of stuff for my ae71!

Sorry to Be a Post whore but i really Need Help Ive got it Well i dono how to Describe what its Doing Replaced all the Leads And battery now its just kinda Starting But Not its spinning All the Gear a.c. and do SO on but it just won't start im starting to get really Pissed Of any way of knowing Why it wont start I Just found a wire from the Terminal to the alternator which i fixed just then and still doing the Exact same thing But without the Occaisanal lapse it just keeps going but not going and soon as I let go of the KEy it dies :P please help!!

hey... my mates escort was doing the same thing it would turn and turn but wouldnt start...but he didnt have the wireing harness and was just using a single cable to try and cick it over..i can remember wat he did but when he got the harness it worked..so check to make sure that all ur cables are conected properly...and as stated b4 yeh the starter motor might have dodgy conections or something...

hey... my mates escort was doing the same thing it would turn and turn but wouldnt start...but he didnt have the wireing harness and was just using a single cable to try and cick it over..i can remember wat he did but when he got the harness it worked..so check to make sure that all ur cables are conected properly...and as stated b4 yeh the starter motor might have dodgy conections or something...

lol yeh i remember..it was the altenator..lol check that...lol my bad..maybe mabye not but it doesnt hurt to check..:D..lol cya

Sorry to Be a Post whore but i really Need Help Ive got it Well i dono how to Describe what its Doing Replaced all the Leads And battery now its just kinda Starting But Not its spinning All the Gear a.c. and do SO on but it just won't start im starting to get really Pissed Of any way of knowing Why it wont start I Just found a wire from the Terminal to the alternator which i fixed just then and still doing the Exact same thing But without the Occaisanal lapse it just keeps going but not going and soon as I let go of the KEy it dies :O please help!!

If I've translated this correctly, the engine will now run, but only if you hold the key in the START position; as soon as you release it back to RUN, the engine dies. Is that a correct summation?

If so, then it is possibly a fusible link has blown, or a simple thing like a fuse.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't be ridiculous. "2-3 ugga duggas or one Oof. You have to use Oof on tie rods because you can't get an ugga dugga on there." Is not helping the guy at all.
    • I have done a lot of research before posting here and on gtruk forum. couldn't find anything. I have my gauges all part except the needle itself. the needle has a extremely small hole in the center, but the shaft going to the needle is extremely small and appears to have nothing to index it either. doesn't seem strong enough to simple pry or pull without damaging something. Already tried the old spoon trick on a extra triple meter I have from a gtt, but no luck. the center cap comes off easily but the hole in the meter face plate aren't big enough to get over the needle itself. figured this would be my best place to find someone who might have actually removed theirs. wonder if there is some type of small pin press tool to push the pin in while pulling the needle base off.
    • Ok...its taking me long enough to finally do this.  Feck financial security...heart disease will get me soon enough anyway So welcome to the garage..."Clem" Belsil80 has been running a 370Z in Super TT series. So after entering with him in last years Winton 300 i figured I  need my own car. Seems SAU Vic race cars need to be yellow....{tick} Reckon with enough motor i will be able to make up for the lack of talent and stay ahead of the 370Z... but the LS powered S13 and E36s are a ways up the road Aim is to have a car that doesnt stop or turn but has a bit of shed built motor with jam...maybe some cream  First step is getting this ex drift car log booked I am keeping faithful silver car. As the road-club car gets upgrades the race car wil get the sloppy seconds
    • Assuming that they will come off without damage at all.... i would have thought just pull straight up off the spindle with a something or other than can reach underneath. Have you searched for youtube vids of people doing similar on R34s or any other Nissan from the same vintage? They should be the same technique, in all likelihhood.
    • Keeping in mind that sandblasting is really aggressive on softer metals like cast alloy, and you can do damage that you might regret. For trash wheels, not a problem. For wheels with value/scarcity issues, etc.... perhaps a less aggressive media is a better choice?
×
×
  • Create New...