Jump to content
SAU Community

4+6 Point 3" Harnesses - Fai Approved - $329


Recommended Posts

1. abcent - Black, 4 Point Motorquality harness - CONFIRMED

2. Rowdyr32 - Black or Red, 6 point Motorquality harness - CONFIRMED

3. KamikazeR33 - Black, 4 Point Motorquality harness - CONFIRMED

4. 9krpm - Black, 6 Point Motorquality harness - CONFIRMED

5. Bass Junky - Black, 4 Point Motorquality harness - CONFIRMED

6. gadg/ Let Me Drive - Black, 4 Point Motorquality harness - CONFIRMED

Hi Guys,

Meridian Motorsport is able to offer the Skylines Australia the following group buy special on the MotorQuality brand 4 & 6 point, 3” race harness.

The MotorQuality harnesses are manufactured from high quality Italian components & feature a traditional aircraft style rotary turnbuckle with offset tangs on top webbing for increased driver comfort.

They are available in red, blue & black.

All harnesses will have a 5 year FIA life

The recommended retail for the 4 point 3” harness is $399 & $435 for the 6 point.

Group buy price of $329 for the 4 point & $365 for the 6 point harness -

Minimum group purchase of 5 harnesses, colors to be specified at order.

I will take control of this group buy and at this stage please only post if you are want one or have questions (no other crap posts please) Please post colour required. We will not do anything till we have a group of at least five. If we get more, then I will go back to Meridian for a cheaper price.

Also ERG Harnesses are avaliable. I believe these come out of the same factory as Sparco ones and are an exact copy.

4 point retail $359, group buy $324

6 point retail $399, group buy $360

Thanks, Chris.

post-6928-1137635322.jpg

post-6928-1137635365.jpg

put me down for a Black MotorQuality 4 point harness!

might be a stupid question, but do they come with a "how to install" guide, want to know where its best to anchor them from? ie/ the rear parcel shelf?

Not sure which one would be the best one to go with. I would think that their isn't going to be much difference in quality at all. Both have 5 years FIA stadards attached. I have a ERG one and it's good.

They are pretty easy to install. They just come with some eyelets that are threaded the same as you existing seatbelt bolts. So you just unscrew the existing seat belt anchor bolts and screw these in as a replacement. Then it's just a case of hooking the ends of each belt to the eylets. Which is a clip on/off belay setup similar to rock climbing gear. The top harness belts attach to the rear passenger seat bolts between your rear seats. So the beauty of the setup is that you can still keep your exising belts and have no problems removing and re-installing at any time. A few of the vic guys have these already, so we can show you how we did ours. This is the case with the four point setup in a standard street trip vehicle anyway. Obviously if you were running a cage, or other strut bars, or 6-point there is additional work and you should probably consult a CAMS scrutineer at a minimum.

The other good thing about these are they bolt into the standard ADR approved seat belt mounts, so you know these wont just let go, and have been crash tested.

Just spoke to tony before. He said the erg harnesses are made in an asia country ( I can't remember which one) and he recomended the motorquality harnesses since the are made in italy.

Chris put me down for a 6 point harness by motorquality. He said there are heaps coming. Can I specify colour later. Can't choose between black (inconspicous?) or red for rice.

Those pics dom't show how:

The top harness belts attach to the rear passenger seat bolts between your rear seats.

Could someone post these pics because I'm interested.

No go on those photos?

See here: http://www.skylinesaustralia.com/forums/in...0entry1882711

Post # 49 - Matt has provided photo's of how most of us have setup our harnesses.

My suggestion is to seek expert advise from a qualified CAMS scrutineer (or Meridian) as to your individual setup, as safety is of the highest importance. Many people have raised valid questions to the validity of some installation methods. I personally will stick with the installation setup as shown in the photo's, as this works for me.

These racing harnesses are all FIA approved. No 4/6 point harness are ADR or dotars approved for use in a street car – legally you have to use your lap sash on the street – no exceptions. You can have the 4/6 point fitted to the car, but legally you have to be using the lap sash as well.

don't suppose these are ADR approved?

We need one more person for this group buy to go ahead.

1. abcent - Black, 4 Point Motorquality harness - CONFIRMED

2. Rowdyr32 - Black or Red, 6 point Motorquality harness - CONFIRMED

3. KamikazeR33 - Black, 4 Point Motorquality harness - CONFIRMED

4. 9krpm - Black, 6 Point Motorquality harness - CONFIRMED

5. Bass Junky - Black, 4 Point Motorquality harness - CONFIRMED

6. gadg/ Let Me Drive - Black, 4 Point Motorquality harness - CONFIRMED

As soon as we get a fifth person we will go ahead. If your sure you want one pete let me know and we can go ahead.

Has everyone else got funds and still commited? Please PM me if your ready to go. Once I have five PM's I will reply with account details. If you require shipping please let me know that your are not in Victoria. PM me with your address and I will calculate shipping.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...