Jump to content
SAU Community

Recommended Posts

  • Replies 72
  • Created
  • Last Reply

Top Posters In This Topic

Al man... you totally blew my strategy. Good one... I guess I'll just have to look up in the sky and avoid the area around the mushroom cloud now.

I just finished putting a new clutch in my 33 last weekend. I did it on the ground with 2 mates. Yes! the gearbox is damn heavy! and clearnances are very tight trying to get the box back in, main problem is the startermotor bit on the bell housing hits the floorplan/tunnel. Hope you've got strong arms, cause you'll be pushing the gearbox around a fair bit.

at least you have a hoist, that'll make it easier, an tranny jack would make life even easier again!

my main advice....dont use grease, use graphite powder (grease an clutch plate where you want grip, generally dont mix) on the splines (only small amount of grease where the fork pivots an slave cylinder pivots).

and most importantly. be 100% sure the clutch is perfectly lined up!

good luck guys

Berin

I just finished putting a new clutch in my 33 last weekend. I did it on the ground with 2 mates. Yes! the gearbox is damn heavy! and clearnances are very tight trying to get the box back in, main problem is the startermotor bit on the bell housing hits the floorplan/tunnel. Hope you've got strong arms, cause you'll be pushing the gearbox around a fair bit.

at least you have a hoist, that'll make it easier, an tranny jack would make life even easier again!

my main advice....dont use grease, use graphite powder (grease an clutch plate where you want grip, generally dont mix) on the splines (only small amount of grease where the fork pivots an slave cylinder pivots).

and most importantly. be 100% sure the clutch is perfectly lined up!

good luck guys

Berin

garrr that made it sound worse :lol:

Mabey you should come help a lending hand :lol:

do you have to re adjust it after? cause i rear pull type cutchs are a big to do

hey narkeh, is my stuff still at teh workshop? I need to grab teh seatbelts and some trim for one of the 86 guys. Need to organise to meet with you as well. PM.

lol @ this thread

yeah could be a bit scarey just me and nate doing it.... butt fcuk it... we'll be right! :mellow:

maybe...

so you and nate will be butt fcuking hey?? and why do you want us all to come help again? I'm sure nate loves teh maori cawk.

if ur gonna pick bits up then pick it all up... or its getting dumpstered cause my bro keeps pestering me about it.

yeah i'll be taking a video camera to capture all the butt fcuking for "iNark and Nates butt fcuking adventures"

if ur gonna pick bits up then pick it all up... or its getting dumpstered cause my bro keeps pestering me about it.

yeah i'll be taking a video camera to capture all the butt fcuking for "iNark and Nates butt fcuking adventures"

boooyah!! have you got a gear box stand? :lol:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...