Jump to content
SAU Community

Recommended Posts

Hi all,

I was driving today and all of a sudden the hicas light came on, nothing happened at first then after a while the steering got heavy and would jerk when i turned. the other weird thing is that there's a tapping noise coming from under my feet which i can hear and feel when i turn the steering. I am at a loss as to what the problem could be i ran a search but didnt turn up anything useful any help would be much appreciated

Link to comment
https://www.sau.com.au/forums/topic/103136-problem-with-hicas-on-r32-gtst/
Share on other sites

Hui,

Usually when my light came on it was caused by low fluid level in the steering resevior, check that. as for the knocking noise, perhaps a steering shaft universal is starting to fail of is hitting something, check also the steering shaft rubber dampner

Hui,

Usually when my light came on it was caused by low fluid level in the steering resevior, check that. as for the knocking noise, perhaps a steering shaft universal is starting to fail of is hitting something, check also the steering shaft rubber dampner

i'll check them out 200 thanks

i got another problem i think theyre related my battery died this morning and alarm was goin off. chargeed it took it for a drive, the steering is still twitching and hicas light flashes on and off. need help please, has anyone had this happen to their cars before?

Have you reset the ecu?

Just a thought, could't harm anything if it is a fault in the programming or something

Yeah mate tried that and ran diagnostics no faults came up but i still got the same problem. i charge my car up drive it hicas light comes and steering wheel tugs when i turn, leave it over night battery dies again when i go to start it in the morning and this batterys brand new, its freking me out

You can try checking that your altenator is charging the battery properly and if it is, then you've got a draw. Meaning despite the car being off there's still power going to something and causing a drained battery come morning. Worth a check anyway.

As for the HICAS prob, maybe be a sensor problem that only acts up periodically and was fine when tested it, most likely (knowing your luck) it worked fine then and then crapped out later on you. These things are hard to trouble shoot so the next time the light comes on, do the test then. Hopefully you'll get an answer.

Good luck.

Cheers B)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...