Jump to content
SAU Community

Recommended Posts

Hi everyone I really need some advice from you guys.

I have a Series 1 R33 Sedan - the one with the ugly taillights lol.

I'm in the processes of doing her up but I can't get past the lights. Anyway I want to do a conversion to Series 2 taillights.

So basically I want to rip them out and chuck in series 2 ones. Has anyone done this before?

What I need to know is, is it possible?

Thanks

PS. Below are the only two pics that I could find the 1st a series 1 (silver one) and the 2nd a series 2.

http://www.skylinesaustralia.com/photopost.../big/perpage/12

http://www.skylinesaustralia.com/photopost...door/perpage/12

the 2nd one is Impul version isn't it?

Hi no the second pic is just a Series 2 sedan.

Most people hate the back of the R33 series 1 sedan & because the series 2 sedan is so rare, most people do not know it exists.

Rarity - that's one reason why I want to do the conversion.

Jlnewton, you must have one of the only series 2 R33 sedans in brisbane. Good on you they look sweet.

Does anyone know any contacts in the spare parts industry?

I contacted about 20 places on saturday and not one of them has series 2 sedan tail lights. Over half didn't even know that there was a difference between the two series.

It's hard enough finding skyline sedan parts as it is.

Thanks

Try Justjap, they may be able to source some for you.

Thanks chaos, i'll try them in the morning!

Do you know anywhere that would possibly have them in stock? Or if it doesn't take too much time could you please give me the names of the main mobs that you know in Australia?

Thanks

i think its called Alljap aswell, there a wrecker on the northside i believe (not 100%) sure. Justjap are located in Sydney but they always over night their parts etc as i've bought a few things off them.

Also go to the buisness trader section on the forum and ask around there, they may have some or can source some aswell.

Also, the only difference I can notice with the lights is that the blinkers are in a different spot.

Would that be a problem or do you think that it would be easy to get around?

And Chris I'll let you know the end result.

Thanks

I have picked up the lights and the centre garnish today & they are in perfect condition. The car I got them off was a 1997 series 2 40th annerversary special edition and it alsol had a special edition spoiler.

Anyway the spoiler looks great but the guy won't sell it without the boot. My question is would the boot also be interchangable with my series 1 boot?

Thanks

Edited by jcsky2005
I have picked up the lights and the centre garnish today & they are in perfect condition. The car I got them off was a 1997 series 2 40th annerversary special edition and it alsol had a special edition spoiler.

Anyway the spoiler looks great but the guy won't sell it without the boot. My question is would the boot also be interchangable with my series 1 boot?

Thanks

Yup. Congrates on the find.

There are a few series 2 sedansin Bris. My new one obviously, my old one is still getting around here, and I have seen a purple one, white one, two other silver ones, a creamy/off white one and a dark blue one.

Yup.  Congrates on the find. 

There are a few series 2 sedansin Bris.  My new one obviously, my old one is still getting around here, and I have seen a purple one, white one, two other silver ones, a creamy/off white one  and a dark blue one.

Yeah thanks.

Both lights and the garnish set me back a very reasonable $450.

Dropped in to see my cousin who is a panel beater yesterday and he reckons that they will slot right in no problems. He also quoted me $100 to prep, paint and fit the lights….I owe him one!

So that’s $550 all up. I took some pics yesterday of the back, so I will post the before and after pics when the cars done.

Jlnewton, what year is yours? And did the back/taillights of a series 1 sedan play a role in your decision twice to purchase a series 2?

The car I got them off was a 1997 40th anniversary and the rear wing and stock body kit was simply just really nice. Shame that one side of the car was in bits and pieces, scattered on the side of a highway somewhere because I really liked those skirts!

Mine is a 97 manual. The main reason for going to the series 2 is the battery has been relocated back to the front of the car, same layout as the R34s. Means a much more usable boot space which is the whole reason I wanted a sedan, to be more practical.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...