Jump to content
SAU Community

Recommended Posts

Steel wheels

Non bbearing, spins magic tho

Standard size wheels

R32s and 33s never came out with T3s

Its bigger than an R33 T28

T3 Flange yes it will bolt on, you just have to check water/oil lines

It came out of a 300zx vg30

Just cost $450 for new core and alluminium comp wheel

So its basically new except for the Wastegate actuator

$800

is the wastegate door,built into the dump pipe cause if it is, its off the older 300zx vg30det, ive got 1 i bought for $200 and its magic on a rb20 only prob is like i said u gotta make up a funny wastgate dumpipe for these turbos but the stock 1 is actually 3" so i didnt worry

Lowlux, I think this is correct, different to the T28 style wastegate from the R33s

I originally bought it from a shipment from Japan thats why i think it comes from a VG30 rather than a VL

87vlt its not hiflowed, its just a T3 with Steel wheels

Originally posted by Works Auto

R32;s and r33's actually use a HItachi turbo not garrett like everyone thinks .. but it is equivalent to a t3.

It didnt say it was from a skyline.

But yes your right.....

This t3 ex housing is bigger than the R33 tho!

Simon could u ask around if anyone is looking for one of these already done?

Cheers mate

mac

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...