Jump to content
SAU Community

Recommended Posts

Steel wheels

Non bbearing, spins magic tho

Standard size wheels

R32s and 33s never came out with T3s

Its bigger than an R33 T28

T3 Flange yes it will bolt on, you just have to check water/oil lines

It came out of a 300zx vg30

Just cost $450 for new core and alluminium comp wheel

So its basically new except for the Wastegate actuator

$800

is the wastegate door,built into the dump pipe cause if it is, its off the older 300zx vg30det, ive got 1 i bought for $200 and its magic on a rb20 only prob is like i said u gotta make up a funny wastgate dumpipe for these turbos but the stock 1 is actually 3" so i didnt worry

Lowlux, I think this is correct, different to the T28 style wastegate from the R33s

I originally bought it from a shipment from Japan thats why i think it comes from a VG30 rather than a VL

87vlt its not hiflowed, its just a T3 with Steel wheels

Originally posted by Works Auto

R32;s and r33's actually use a HItachi turbo not garrett like everyone thinks .. but it is equivalent to a t3.

It didnt say it was from a skyline.

But yes your right.....

This t3 ex housing is bigger than the R33 tho!

Simon could u ask around if anyone is looking for one of these already done?

Cheers mate

mac

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...