Jump to content
SAU Community

Recommended Posts

Hey fellas,

Im pretty new to this site so if ive f**ked up somehow with the way ive added this topic feel free to write me off.

Anyways, My R33 gtst has recently been fitted with a new rb25det 97 model motor. It has turbo back exhaust, front mount, k and n pod, boost to 12psi, dump and front pipe and a hi flow cat. KYB struts and hard coils and 235 reo40 tyres.

The question is how far off staying level with a stock r33 or r32 gtr it is? the reason I am asking is if it is a fair way off, I have the money ill piss it off and by a gtr.

So a bit of advice would be appreciated guys. what 400m time could i expect with these mods? high 13s?

Thanks again, This site is great im learning a lot from it

If you're going to modify a car up, you always start from the model that has all the bits you're not planning on replacing.

For Skylines, that's the GT-R since nothing else comes with the hydraulic ATTESSA and its way too expensive to retrofit it on a lower model. You don't necessarily need to look for a V-Spec or N1 if you're planning on replacing the brakes / turbo etc, but that stuff's bolt on compared to the drivetrain.

You might be able to keep up with a stock R32 / R33 GT-R (I'm assuming in a straight line, around the bends its still going to disappear on you), but good luck finding a stock GT-R on the roads.

If you are prepared to spend another $5k you can get some great fun out of your R33..

Don't buy an old 89/90 model GTR for $22k if that is what you are thinking. I wouldn't spend too much less than 30k to get a good R32 GTR

ive owned an 32 and 33 gtst and most recently had an r33 gtr. when the gtr was all stock except removed boost restrictor and HD clutch it ran 12.8@106. the gtst's i had, had mods similar to yours and would not even come close to the gtr.

as much as I loved the gtst's, once i sat in the gtr I knew that I would never go back... go the gtr if you can!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...