Jump to content
SAU Community

Recommended Posts

heya mate, yeah i got four 32 rims. think they have re540's still on

Yeah, i just remembered that r32 gtst rims are 15in arent they? unless its gtr r32 rims. Hey how about $2100 plus those r32 gtst rims? how are you going to do this transaction if your not in town?

$50 a wheel, that's really cheap!

can u post his contact detail up

or PM me?

Don't have his details on me, he used to advertise in the trader occasionally, don't know if he still does. If I remember I'll grab the details from work tomorrow.

hey Duc, I'll get Chops to do that.

Hey, I am finished with your R34GTT wheels (finally). Give me a call when you get back in town to come grab them or I can drop them to you somewhere. Thanks heaps for that mate!!!

Chops know his business name and maybe details. From memory he was out Waterloo Corner direction

May well be the same guy, a Polish bloke i think. The guys at work can't get over how cheap he is.

The only thing is that he just polishes, if there are any dents etc that need to be polished out you will need to get that done elsewhere and then give the rims to him. Otherwise you'll just end up with polished dents/scratches.

One of the members on here may be able to help you out in that area as he is a great polisher, might cost ya a couple of dollars but i can vouch for the work-A1. I won't name names incase he's not interested.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...