Jump to content
SAU Community

Recommended Posts

just wanted to get so thoughts on air filters, I have a gtr and I am thinking about changing to a k&n pannel or pod filters, but want to know if there is any point to change to pods instead of just a k&n panel? :blink:

in victoria pod filters are legal.

pods make a cool sucking sound(if u like that kinda stuff) but most of them have very coarse elements and let to much dust in if u ask me.

do u want to wear ur engine for the sake of 2hp?

go the k&n panel filter.

The Mines machine runs airbox.

Surely no one can argue with that.

I love that! So true!

I'm about to upgrade alot of components in the engine and i think i may be switching back to stock air box!

Have a look at the ARC Super Induction Box. Draws air like a pod but should avoid being defected due to its design. I run one in my GTR. It actually has two intake panels - on top and on the side. All alloy construction with replaceable filters. Worth a look :)

The ARC box does look cool and efficient however its also around $500 which is abit rich if you ask me.

I'm still not sure if I should convert back to the std airbox or get a custom made enclosure.

Does anyone happen to have a pic of a std R32 GTR airbox?

I went from pods (heat sheilded), back to the factory airbox with K&N panel. The air pick up at the front bar means 'rammed' air at speed keeps the box closer to a positive air pressure which reduces the resistance to flow.

The factory airbox's chamber volume could be improved however for higher horsepower.

The ARC airbox ; where does the air get draw in from as it looks to me like it might still suck in hot engine bay air?

I have decided to keep the standard air box and put a k&n filter in.

I had the box out the other day and discovered there is two inlets, one on top and one on the side.

The one on the side is blocked of from the factory but the bung can be removed easy( this one draws cold air from inside the fender) this also helps with the induction noise and you can hear the standard blow off valves.

I bought both a standard box with a nismo filter (thanks tosh) and an arc box, settled for arc box, so after having each of the 3 options i chose arc box

Benm : at the next cruise you can inspect one if you want, its currently in my mates silver r32

Air filter is a seriously small horsepower improvement. The fact that you gain anything on a dyno is soemtimes negated when you dyno/test with the bonnet 'down' as you always ought to. The airflow characteristics at speed are often quite different to the dyno booth.

If you have an NA car do you get induction noise if you have a podfilter? I was thinking about putting one in with a heat shield but dont want any annoying noise.

You do as i have a pod on my N/A but it runs through the intercooler holes in the car out to the front just behind the front bumper. Dont know if that makes a differences.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Absolutely could be. I collected data logs from when the O2 sensor was still out and also after I had replaced it so will try to compare them. Pretty confident that the affect is lowered with the new sensor, will check logs at the same RPMs/conditions. 
    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
×
×
  • Create New...