Jump to content
SAU Community

Recommended Posts

OK, now before everyone comes up with smartass comments about this, it's not an advertisement for any workshop (as there isn't one), it's just a big vote of thanks to a few people.

As many of the regulars know, I've been doing a turbo upgrade over the last month... sourcing parts, doing research and most of all spending many hours piecing it all together. All up the process took about a month and it is finally complete as of 11/02/2006 - even got the timing just right for a Friday Night Pizza Cruise :D

Now, I'd like to take this oppurtunity to thank a few people for their support, effort and advice... without any of you guys, this would not be at all possible at this pace and effect.

1) My Mechanic Mitch + GCWP

Mitch has been the greatest mate/mechanic throughout all this... he's done 99% of the installs, 99% of the research and 0% of the sleeping :D I had absolutely no troubles trusting my car with him, and even though he's not the owner of a workshop/performance shop, his skills and knowledge are probably enough to rival most professionals.

Thanks a bunch for everything you've done.

2) Trent (BMW Mechanic)

Trent has also devoted quite a few long nights to this project and given some very useful advice. He made up a CAI from my stock intercooler parts which surprises all :D Most memorable of all are all the jokes/parodies that come out of Trent, makes working till 2am well worth it :P

3) Aaron @ Sliding Performance

Aaron has been great with providing the turbo even with my constant naggin about the delays :P He's made sure it's perfect before it came down to Sydney and it is! Appreciate the tech advice too, and am pleased to say this new breed of turbo goes good!

4) Abo Bob - Adam

Yes, I've been pestering Adam for information as well and he's been great with providing solid answers from experience with the R34 - thanks heaps champ!

5) Dave @ Envy Imports

Cheers heaps for doing my oil lines for the new turbo... and also getting me some parts for dirt cheap through Autobarn :P Mitsubishi-san for life dude :D

6) Chris a.k.a. Craved

Thanks for jumping in and giving quick answers/solutions to the coolant line drama... witht the ideas thrown around we got that sorted very quickly. That's 2 times I owe you now :D

7) Everyone Else Involved

Yes, this one is for all those MSN mates, and whore buddies and anyone else who paid us a visit at the workshop :D

And that about rounds it up, sorry if I missed anyone but I think 6) caters for that! I'll post photos of what we did over the new few days after the engine bays been given a clean, looks rather ghetto at the moment!

Cheers

S

Link to comment
https://www.sau.com.au/forums/topic/105347-a-big-thankyou-to-a-few-people/
Share on other sites

Trent + Stan

OMG, come see this new CAI we just made up...

Mitch

FARK there's coolant in my eye, guys there is coolant in my FARKING eyes

Trent + Stan

Man, I reckon this CAI is mad...  Mitch come have a look

:D

OK fine, when we all attend the next whore session, MAR55S can hug everyone :rolleyes:

WOOT! Just got back fron Newcastle run, and very pleased to say that the turbo spools / boosts very very hard. Very responsive on tap from about 2800rpm ;)

Time to get a Fuel Cut Defender so I can remove this stupid fuel cut and boost to the turbo's efficiency range!

Wink; won't be getting a tune until the FCD goes in which will be next week sometime. There's really no point getting it done before then as I'll only be able to boost it to 13 psi before the car's automated protection system kicks in and drains all the fuel / power.

Cheers

Stan

EDIT: John, we'll get some photos up soon :P

Need to get a tune first... then we think about it :D

Since I took two days off work to finish the car last week; I am now paying for it by having to do a TONNE of work for tomorrow :D Oh well, the prices you pay for satisfaction :)

okay the plan is. You get the tune. I buy your Turbo and stick it on my Charade when I get it back from panel beater. We go to WSID, and you succomb to the power of the mighty 3 cylinder beast. :lol:

Edited by Dingo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
×
×
  • Create New...