Jump to content
SAU Community

Recommended Posts

Well the R31 fans will be happy. There is now a 3rd ready to race.

met the bloke in p.i.

nice guy!!

now we can get 1,2, AND 3 on the grid!!

gotta say brockie is tough competition

terry and rod have their work cut out for them in the upcoming rounds

  • Replies 95
  • Created
  • Last Reply

Top Posters In This Topic

Do you have the log books? Le tme know what year photos you are after and i will hit up my friend.

So its been converted to a Sports Sedan...looks cool. But if youwant to restore it to its former condition then you have soem fun weekends ahead :D

DR30s are cool! Maybe even cooler then R31s!!! But they dont have RB20s so the R31 just pips it accross the line :D

Got the log books All numbers check out It's the real car. It had a number of parts from GMS incorporated into it over its Group A history

First log booked on 17.9.85 Owned by Murray Carter then Murray Carter and Bill O'Brien then Murray Carter, Matt Whacker, Clive Smith then me

First race 12.4.86 at Sandown. I'll post my prelim research on race history when I get to work on Monday if anyone is interested

Looking for 1987 or 88 photos in Netcomm colours

Any anecdotes or stories about the car would be welcome or comments on its history

At Bathurst probably 1987 it was the subject of quite a lot of in car footage I think because the communication system was fairly new. Does anyone have a copy of that I might be able to obtain or know where I can get a copy

It was also featured (I guess the communication system) in Beyond 2000 Not sure when Does anyone have any info on that programme

Got the log books All numbers check out It's the real car. It had a number of parts from GMS incorporated into it over its Group A history

First log booked on 17.9.85 Owned by Murray Carter then Murray Carter and Bill O'Brien then Murray Carter, Matt Whacker, Clive Smith then me

First race 12.4.86 at Sandown. I'll post my prelim research on race history when I get to work on Monday if anyone is interested

Looking for 1987 or 88 photos in Netcomm colours

Any anecdotes or stories about the car would be welcome or comments on its history

At Bathurst probably 1987 it was the subject of quite a lot of in car footage I think because the communication system was fairly new. Does anyone have a copy of that I might be able to obtain or know where I can get a copy

It was also featured (I guess the communication system) in Beyond 2000 Not sure when Does anyone have any info on that programme

Please post up - all Group A history is good in my book!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...