Jump to content
SAU Community

Recommended Posts

I had to go to the post office earlier today and went down the road to the local westfield in figtree (it is in wollongong). I was no more than 15 minutes inside the centre when i returned to my car and saw that just behind the back right wheel some idiot scraped his car down the side of mine.

Now i usually park as straight as i can right in the middle of the parking spot as i dont want any people to hit my doors with theirs. Now it looks like i have to worry about people not knowing how to reverse out of a spot.

Seriously, it is very frustrating. Some drivers must judge the amount of space they have left by saying, "when i hear a thud or a grinding noise i know thats when i have enough room, but what the hell, i'll keep going anyway."

Damage isn't as bad as it could of been i suppose. Good thing my uncle is a panel beater and owns his own shop so he can fix it back up at a low price (cost if materials and here is a case of beer sort of thing for your time).

Link to comment
https://www.sau.com.au/forums/topic/105950-shopping-centre-carparks/
Share on other sites

be selfish, BE VERY SELFISH when parking, take up 2 spots if you can....because your skyline is more precious than the value of what ever thy are driving

Edited by lingeringsoul
be selfish, BE VERY SELFISH when parking, take up 2 spots if you can....because your skyline is more precious than the value of what ever thy are driving

Ive considered that, but then i read a few comments some guys posted and they said that they get targeted for taking up 2 spaces. :s

You can't win.

yeh your probably more likely to get your car keyed by taking up to spaces. First time I ever took my line to a shopping center some one reversed into when leaving and chipped a little bit out of my rear bar.. and 2 hours proir to that some one reveresed into smashing my reverse light <_<

Some old fart reversed into my fiancee's car today. She was standing right next to the car when it happened and started yelling at him to stop but he was off in old man's land and just ignored her. I try to avoid car parks.

I have the same scrape on the rear wheel arch of the Zed.

Happened in the carpark at work and the black paint on the bumper of a 4wd that often parks next to me gave a pretty good indication of who might have been responsible.

Funnily enough they haven't responded to the note I left on their windscreen saying I think they might have "accidently" touch parked me.

U think thats bad

i work at Castle Hill RSL and ive been hit 3 times in 1 month since i have started working there

First time was my front guard was dented in, then my rear drivers side quarter panel got dented in with a long scrape and 2 days ago my front bar got 3 large scrapes along the side and is almost falling off

there are cameras in the carpark but they cant tell who actually does the damage

Extremly frustrating......i goto work to earn money ...to pay for the damage that i get from working

Ps. i always park in the middle on the lines and infront of cameras

Anyone know what i can do????

damn skyline17, i think your best bet would be to park on the street or possibly buy a sh*tbox runaround car thats not worth much and is also something you dont really car about if something were to happen to it.

Or get a couple of witches hats and put a couple in the spaces next to you.

Bottom line is some carparks are not for people who actually value their car.

Other option is to always park next to cars more expensive than your own :P

that's what I do.. same goes for detering theives... park next to cars better than yours so they take them instead

I've been to about 25 shopping centres in the past few weeks for work, and the amount of dodgy driving and parking that goes on during hte day, you'd be astonished at some of the shit I've seen!

If your parking in shopping centers that have multi storeys, pick a very large pole to park next too... Park one sie as close as possible to that pole, so the person who parks next to you can swing there door open a little more, and the pole will protect at least the other side of your car.

Thats what I usually do and seems to be working quite well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...