Jump to content
SAU Community

Recommended Posts

  • Replies 461
  • Created
  • Last Reply

Top Posters In This Topic

I dont recomend george mays. not very happy with his work there at all. At the end of the day, I had to reinstall the injectors that they idnt put in properly and fuel was spraying all over the engine bay, after they worked on it a heater hose was moved and rubbing on the exhaust, so I had to replace that also, the tune was very very bad, didnt go as good as it did when it went in, and he just wasnt interested in helping me get it going right.

I paid nearly a grand for nothing really cause I had to fit the injectors, had to get it tuned elswhere to fix his tuning (they said he only tuned a small rev range and guessed the rest) and had to replace the heater hose and go without the car for weeks!

NOT HAPPY!

just my experience with George Mays.

Rhys

i havnt heard a lot of good things about old george may either... does some good customising of metal work, plumbing and manifolds but the rest is a bit dodgy.

i know that h +e auto electrics in noosa are very good at what they do but i dont know if they can tune an ecu at all... dont even know if they are still there.

place ive heard only good things about it charlies motors in brissie... dont know much about them tho. i think they tuned my power fc before i bought the car and it runs well... reliable + power.

hey drift limo, saw your ceffie on the side of the road yesterday out the front of lifeline in kunda park with the bonnet up. seen it at george mays ages ago aswell. where has it been for so long? not rego'ed im guessing....

Hahahaha yeah that was about 1/2 an hour after we picked it up.. Stalled like 5 times from Racecraft to where we were sitting lol. Had to go buy a new battery... Managed to limped it home (on base maps with 4 cylinders running :dry: ) You were'nt in the blue festiva were you?

Nah she's not even complied yet.. May be looking at a new bottom end first :)

Chris your talking about Blakes old Ceffy yeah?.. I was gonna buy that but couldn't get the cash at the time. I'm good mates with Ryan :wacko:

Hahahaha yeah that was about 1/2 an hour after we picked it up.. Stalled like 5 times from Racecraft to where we were sitting lol. Had to go buy a new battery... Managed to limped it home (on base maps with 4 cylinders running >_< ) You were'nt in the blue festiva were you?

Nah she's not even complied yet.. May be looking at a new bottom end first :nyaanyaa:

Chris your talking about Blakes old Ceffy yeah?.. I was gonna buy that but couldn't get the cash at the time. I'm good mates with Ryan :)

no i was in the falcon work ute, i drove past as i was heading back to work.

how hard is it goin to be to get it complied now that the 15 year rule is out and u have to go through sevs compliance??

Ah just some guy in a festiva tooted and waved..

Already been through this with my Laurel wich is uncomplied too.. Only need the import approval to state it came in under the 15 year scheme.. Will still be eligble under that rule.

Unsure if its worth the effort to get it engineered atm.. Will prob get rolled by the popo every week if I rego it :

Edited by Drift_Limo

Go the BLUES!! Oh yeah - we suck...

Keen to go to drift nats - still organising tho.

egg ball ay, i dont even watch the sport untill this time of the year but egg ball is a bit of a silly thing to say unless you are a nsw man and just trying to protect yourself...like me haha.

dish is the enemy... my wheels are rubbing on my wire loom in the wheel arch. and i finally got my brake booser fixed and now the brake lights get stuck on some times.. import = pain and money but you cant get around it.

Haha i remember seeing that ceffie at george mays for ages, looked fat! Pitty about george mays doing the work though, my mates 200sx was getting some work done there and he charge a hidious amount for the work...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...