Jump to content
SAU Community

Hks V-cam?

s13rb26

By s13rb26,
in Engines & Forced Induction

 Share

Recommended Posts

s13rb26 Enthusiast

s13rb26

Posted
  • Author
Posted

i seen in the hpi

t04z hks

hks vcam

2.7 jun pistons

apparently they are making ultimate response and powerhouse with this setup..

but apparently they are still tuning the vcam..

what does this benefit as ill be running a t04z but still 2.6.. maybe getting a vcam from hks is a option to boost up the response and power output?

Link to comment
https://www.sau.com.au/forums/topic/106155-hks-v-cam/#findComment-1956729
Share on other sites
Kaido_RR Grand Master

Kaido_RR

Posted
Posted

Hks V-Cam:

Merit

● The intake cam of RB26DETT continual variable valve timing conversion. Private V As for CAM opening 248°. At first glance, it is moderate numerical value, but low showing the efficiency which surpasses normal lightly to revolution - high revolution with variable valve timing mechanism.

● Such as treatment easiness with the street such as surpassing acceleration on the highway and the uphill road and the time rise with the acceleration from the low-speed corner at the time of circuit travelling, with various actualizing the torque rise of very profitable concave speed situations. It locks gear position and, keeps accelerating the body very easily even to the cartridge. Improvement of torque near the supercharging standing up is the feeling like whether aerodynamic volume displacement UP it did quite of, from the especially vacuum limits.

● Because also combustion circumstance is improved by the fact that valve timing optimizes, low also environmental efficiency such as fuel economy conversion and cleanliness conversion of the exhaust improves.

● This kit typeA which can be installed easily in normal engine correspondence (the val tie variable quantitative 30°) with, expands the variable quantity by the fact that piston exchange is done and the maximum variable valve timing mechanism typeB which can utilize (the val tie variable quantitative 50°) setting 2 types.

● You can select the exhaust side camshaft due to the turbine.

Recommendation: GT-SS -> 256° and GT2530 -> 264°

VCS-4.gif

Link to comment
https://www.sau.com.au/forums/topic/106155-hks-v-cam/#findComment-1956748
Share on other sites
rob82 Mentor

rob82

Posted
Posted
Hks V-Cam:

Merit 

● The intake cam of RB26DETT continual variable valve timing conversion. Private V As for CAM opening 248°. At first glance, it is moderate numerical value, but low showing the efficiency which surpasses normal lightly to revolution - high revolution with variable valve timing mechanism.

 

● Such as treatment easiness with the street such as surpassing acceleration on the highway and the uphill road and the time rise with the acceleration from the low-speed corner at the time of circuit travelling, with various actualizing the torque rise of very profitable concave speed situations. It locks gear position and, keeps accelerating the body very easily even to the cartridge. Improvement of torque near the supercharging standing up is the feeling like whether aerodynamic volume displacement UP it did quite of, from the especially vacuum limits.

 

● Because also combustion circumstance is improved by the fact that valve timing optimizes, low also environmental efficiency such as fuel economy conversion and cleanliness conversion of the exhaust improves.

 

● This kit typeA which can be installed easily in normal engine correspondence (the val tie variable quantitative 30°) with, expands the variable quantity by the fact that piston exchange is done and the maximum variable valve timing mechanism typeB which can utilize (the val tie variable quantitative 50°) setting 2 types.

 

● You can select the exhaust side camshaft due to the turbine.

Recommendation: GT-SS -> 256° and GT2530 -> 264°

VCS-4.gif

My Jinglish isn't so good. Sounds good though. Suprised nissan hasn't done more with cam phasing.

Link to comment
https://www.sau.com.au/forums/topic/106155-hks-v-cam/#findComment-1956810
Share on other sites
CruiseLiner Mentor

CruiseLiner

Posted
Posted

whats the v-cam system worth and can i run with aftermarket 272/11.35mm cams ? finding someone in WA to set it up is the hardest part i bet.

are these available yet?

might be well worth the money if someone knows how to set it up correctly.

any ideas how it is setup? dyno tuned i suppose and similair setup to aftermarket ecu's to tune?

cheers

Brad

Link to comment
https://www.sau.com.au/forums/topic/106155-hks-v-cam/#findComment-1960071
Share on other sites
Kaido_RR Grand Master

Kaido_RR

Posted
Posted

if your interested to really see the difference, i will try and find my best motoring GTR specail. It shows the HKS demo r34 gtr car with it doing a LAP with the system on and off. it does make a difference to low down responds...

I know of one gtr in perth who was thinking about getting it... but i dont know if the person ended up getting it...

Link to comment
https://www.sau.com.au/forums/topic/106155-hks-v-cam/#findComment-1960081
Share on other sites
CruiseLiner Mentor

CruiseLiner

Posted
Posted
if your interested to really see the difference, i will try and find my best motoring GTR specail. It shows the HKS demo r34 gtr car with it doing a LAP with the system on and off. it does make a difference to low down responds...

I know of one gtr in perth who was thinking about getting it... but i dont know if the person ended up getting it...

http://video.google.com/videoplay?docid=-7...176590388&q=hks thats a vid of it testing it on and then turned off.

ants gtr i suppose, being the hks distributors?

Link to comment
https://www.sau.com.au/forums/topic/106155-hks-v-cam/#findComment-1960086
Share on other sites
WetGTR Proficient

WetGTR

Posted
Posted

For those that are considering this, tuning the thing would be my grestest concern. Not many ECU's would do a good job with variable cams even the ones that have that feature as part of the ECU.

I would speak with a tuner that has successfully tuned an engine with variable cam timing & turbo charged and see what their thoughts are first.

Just my thoughts....

Link to comment
https://www.sau.com.au/forums/topic/106155-hks-v-cam/#findComment-1961438
Share on other sites
zErTeK[2k] Rookie

zErTeK[2k]

Posted
Posted (edited)

last i herd i didnt know these were available to the public yet as i believed there were only a certain amount made at this time and they were passed out to shops to use in there demo cars and so on but if they are available already is a good thing for anyone with a big single set-up even with twin set-ups they work well though as seen in HPI on a bayside blue R34 with twin 2835R's the power curve is very nice.

Edited by zErTeK[2k]
Link to comment
https://www.sau.com.au/forums/topic/106155-hks-v-cam/#findComment-1962360
Share on other sites
Amaru Veteran

Amaru

Posted
Posted

They are availible to the public, however they are nowhere near as aggressive cam profiles as the test units (e.g. on that R34).

As for ECU, HKS Fcon V Pro is your friend... well, as long as you can find someone to tune it :unsure:

Link to comment
https://www.sau.com.au/forums/topic/106155-hks-v-cam/#findComment-1962391
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      This everytime 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • MBS206
      new 1.5 LSD issues/concerns

      By MBS206 · Posted

      Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • MBS206
      Most women will agree that parking is the most taxing part of driving

      By MBS206 · Posted

      You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...