Jump to content
SAU Community

Recommended Posts

i havent got hiflowed injectors, but in my opinion i would go either nismo ones, or another brand that flow how much ya need.

As with hiflowing the standard injectors, there is a possibility of not getting the injectors to flow all to the same capacity. Is this correct as only from what i have heard?

Having hiflow injectors flowing all the same, i guess would be great and cost effective, but i'd rather have brand spankers out of the box.

Will be keeping an eye on the post, from ppl who do have hiflow injectors and other ppls opinions.

Hiflowed injectors? Interesting, i did a search and didnt come up with anything, but I thought the only way to get more out your standard injectors was running a Fuel Pressure Regulator? So how much does this cost? And given the standard injectors flow 370cc, what will a 'hiflow' net? This may be a good solution for my fussy 'specific design' NEO injectors..

got my rb25 series one 370cc/min hiflow to 500cc/min here in melbourne by avo . it was a while ago now but i think it cost around the $450 mark. my tuner said that it was hard to get them to idle without running to rich and that they were more like 650cc/min. having said that though im running 281rwkws with heaps of duty cycle left. car idles fine and ive had no problems. ive had them in my car for the past 2 years.

got my rb25 series one 370cc/min hiflow to 500cc/min here in melbourne by avo . it was a while ago now but i think it cost around the $450 mark. my tuner said that it was hard to get them to idle without running to rich and that they were more like 650cc/min. having said that though im running 281rwkws with heaps of duty cycle left. car idles fine and ive had no problems. ive had them in my car for the past 2 years.

Awesome. Very cost effective. This is the way that Id like to go, eventually, when I can afford a hiflow turbo!

yea they are straight fit, some shops from the US, I heard of them from another guy in the forum who used them in his car, think theres somebody from the company in the forum. Maybe try PMing him I think his name was deatschwerks or deatschwerk forgot

www.deatschwerks.com

I was looking at this guys injectors a while a go. They look like an excellent low cost alternative to the jap brands and are a direct replacement, no stuffing around with collars etc.

He supplies a flow report with every set of injectors and they work out around $600 delivered for whatever size you want. I think he also offers some type of rebate if you give him your stock injectors.

$3 - 400 cheaper for the same result sounds pretty good to me.....

Edited by Lazy-Bastard

damm right. if this is a low cost alternative maybe its worth a go. there is a down fall tho, you arnt paying for the brand name= many years in the business eg nismo..... sard etc etc. but who knows not always are the brand names better. has anyone had problems with these different injectors. so far i have heard only good things.............. thats a bonus i suppose.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...