Jump to content
SAU Community

Recommended Posts

LNEMUP

What got me pissed off, is that I realy don't care for the rediculous claims, but then starting up a new thread trying to flog of the items involved in the claims for exorbitant prices with a stated claim of "runs 10s" package. What a load of sh*t. Cause I believe in a fair trading system for all the members on SAU as we all had to work hard for our $$, and trying to conjur up a bullshit claim and then flogging of the ideas and unsubstatiate bits is WRONG!!!!

I actually believe and seen the ppls posted here so far, have given you more than enough courtesy rope.

So, stop the arrogant/aggresive attitude toward others and show them the courtesy that they have shown you.

BTW please don't try and dare members on here to line you up, all I can say for a car that is barely and most probably hitting low 120s mph is not exactly a rocketship.

Well at least somebody reads what I write :turned:

I always read what you write, I even get a pen and take down notes sometimes.

Time to calm down. Anyone else would have been sent packing by now.

Continue and i'll throw ya some points.

You've done nothing really constructive since you started this thread with more claims than a Demtel Add.

Its almost bordering on me deleting it.

The flack you are now getting now is a direct result of your arrogant attitude to begin with.

You can say it will "run 10z"... i could say that about my car aswell... who is more correct? No-one.

Until it does run a time, i suggest you stop saying "it will do this, it will do that"

This is a happy place. Not a place to come sprog about how good you are.

Well said Ash; always on the ball this one!

Listen buddy

if your so confident in your car

LNEMUP

Any time

CYA at the track

Hope someone will LNEMUP

You realize even if you run your car into the 10’s there are a few owners with cars on this forum that are much faster than yours.

Just an observation!

This ones the armchair edition, but my favourite bloke anywhere at any time is Adrian. Damn, he's just so good I can barely contain myself.

:P

(Be careful who you mess with, Stuie!)

The Jedi knights are using the force again, i swear i didnt write that, funny that Adrian

lol @ bannin him..maybe da line en em up call was a bit cocky but for f*ks sake let da man speak... i got flamed aswell by KEYBOARD mechanics wont mention names..but you know who ya are...im still redlining my stock 25 a yr later..but a batch of bad fuel was gonna blow my engine huh.rofl.. why everyone so mad at dude..but yeah wouldnt mind a vid or a e.t that matched the hp..

btw u own a dyno or did i miss some thin..200 dyno runs would cost a f*kin fortune at my mechanics...

Edited by thizzle
I always read what you write, I even get a pen and take down notes sometimes.

Dam, I save SKs posts and keep em in seperate folder entiled posts by SK. His knowledge is just as good as his willingness to help. Eventually I could put a book together from his helpful posts and sell it :thumbsup: Well kidding about the latter....

SK can I send you my dyno sheet and could you predict my time?? Hahahah, get your crystal ball out and you could make some cash!!!!!!

Wow I just finished reading this post from start to finish!

Motor looks good. I love a good engine bay.

And you did make the mid 11's. Good work.

Probably could go a lot faster if you spent a bit of that mullah on the suspension set up, not just the motor.

Hopefully the people flamming you will respond to your new times. Unfortunately they arent world beaters. But they are better and show more potenial. Were you happy with the runs? As that MPH is still a little short of the mark.

Oh and i'm another bolt on queen. lol...

I went just under 270rwkw with stock internals. But my tune is pretty rich in order to preserve the motor.

Whats that work out at in teenage language? 360rwhp?

If Canberra had a strip i would love to have a go at the 1/4 mile but my experience (in drag racing) is non existant...

Edited by Stevie

I don't know if this is in the right thread, but anyway.

Can anyone tell me what the first things that are mosot likely to break in the 25? I'm considering a bolt on package (GT35/40) but need to know what I should be replacing/upgrading first internally so it will hold a bit more power reliably?

I'm aiming for around 350-450hp until I save for a complete rebuild, does this sound achievable? Sitting on around 330hp atm

I don't know if this is in the right thread, but anyway.

Can anyone tell me what the first things that are mosot likely to break in the 25? I'm considering a bolt on package (GT35/40) but need to know what I should be replacing/upgrading first internally so it will hold a bit more power reliably?

I'm aiming for around 350-450hp until I save for a complete rebuild, does this sound achievable? Sitting on around 330hp atm

PM the following user: "Bezerkly"

Their RB25 with a 35/40 conversion is holding 285rwkw reliable as clockwork and has seen 124mph at the drags. The car is driven (hard) every day and seems to love the punishment. It uses totally standard internals.

Adrian

Generally the ringlands, but thats as much tuning as anything else.

And how good the motor is to start

Also watch the revs, dont increase too far for the oil pump and the rod bolts.

Should be able to crank 280 like Bez has been if you keep things within limits

holy crap just read the whole thread

funny a piss

i was a bolt on boy but have since changed my ways

i was making a firm 300rwkw on pump fuel with big bolt on's

it died cause of me "doin some drifting thus causeing the arse end to lift up getting a huge free revs and cracking number 2 ring"

you say im goin to be running 10's haha still yet to see it

what kind of torque you running i should be running 10's and i shou ld have 350kwkw but suspension diff and tyres

these motor are built for a reason i did around 200 runs on a brand new dyno dynamics dyno

someone drag him or ill have to drive 10 hrs to do it lol

power wins at the pub

torque wins at the track

Umm ok

i detuned the car and am running

50 shot of nos now

making

around 1850 lbs of torque and

540 hp

will post dyno sheet tomorrow

the problem is with half the people on this forum is they listen to people talk shit and never try anything

i thrash my car day in day out and the thing has lasted me

almost 350 dyno runs,2 wsid meetings,5 monster power burnouts so yeah

As for the eastern creek runs

i am only crossing the line at about 6800 now so i need taller gears to cross the line at 7600

once i get the gears i will run in the 130 mph area

As for suspensions its being designed in the process

i am doing a 1.8 60` so its telling me not launching any good lol

ill set it up and let every 1 know how it goes

and who every wants to run make sure its worth it

i aint wasting my time on clowns

Edited by MR331307

1850 of tourque and thats all you running those times somethings wrong mine was running 300rwkw running 900 torque and that dyno is only 4hp out of the dyno used at the national dyno comps im still waiting to take it to the drags

Took my car to the track 2nite

Ran 11.3ET at 126MPH

11.3ET at 125MPH

11.4ET at 124MPH

Saw this post and was about to reply with TOP post.

good work.

Then I saw...

and who every wants to run make sure its worth it

i aint wasting my time on clowns

I stick by my inital thoughts throughout this post of "what a tosser"

:)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...