Jump to content
SAU Community

Recommended Posts

Whoa ho, not a bad car really. I used to have the ex2000 1980 i think it was a c210 though. It had a new L20 in it though as the original motor died.

IF ures is tha car im thkning about its the first jap car with turbo, piece of history mate.

Mine exploded and i kicked all the panels in in a fit of rage on teh side of the freeway and had to pay some guy to take it away. That prolly wont happen to you though.

wicked yer thats it!!!! its got a L20 and has nissans first 5spd manual box. not looking the best atm but will be undertaking a full restoration of this car. maybe even planning a l31 conversion!!! of maybe even trying to keep in an original l20. hey if u guys want i might bring it down to the meet point of the next cruise

yer thats the one hahahaha its got the original l20 and original turbo 223K on the clock need new plugs sounds like it got cams :) currently sounding like a lumpy v8!!! :D. interior is almost perfect apart from the dash!!! body has some minor surface rust will start sanding her back on the weekend. thinking of getting a full midnight purple respray

Edited by kamakazi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...