Jump to content
SAU Community

Custom Badges/emblems

seriesII

By seriesII,
in Queensland

 Share

Recommended Posts

seriesII Mentor

seriesII

Posted
  • Author
Posted
im not sure where u can buy them but i have seen a GTS badge done like the gtr badge, but where the big "R" is under the gt it's an "S" instead. look on ebay u mite find sumthing for ideas......

yeah, thats what im after but with a little bit of my design on thre, ive seen a gts with just GT, then S in silver and loox awesome on a gtr grille, if i find out ill post up here and let you all know as well, hopefully some one on the forum will know

seriesII Mentor

seriesII

Posted
  • Author
Posted
saw that GT-S badge you are describing on ebay not that long ago. Cant say i like it but i'll see if i can dig up a link for you :(

hey, thanx for that :D, would be awesome if you could find the link.. i looked on google for a hour or so, but those badge places were not much help when i called them. if i find one ill let every one know of a good place

Konrad Grand Master

Konrad

Posted
Posted

Hey mate,

I searched thru all my ebay history for last 7 days and could not find the item. I definatley saw it though, so keep an eye out it will probably get listed sometime again.

Sorry i couldn't help you much.

sky44.JPG

looked like this but had chrome trim not black.

http://www.miktec.co.uk/mine.htm maybe email the dude and see where he got the badge from?

85URK Grand Master

85URK

Posted
Posted

yeah i was looking for that pic actually lol, anyway i just went searching on the net for places that make badges, and i came across one in america i think, (u will find others in australia) but they had a minimum order of 200pcs and for a test mould it was gonna be $200 for a start off one.lol so its not gonna be cheap, and i doubt they will just produce a single badge just for u, bcoz they have to make the mould etc. so u would have to get a group buy togetther or fork out alot of cash..... is it really worth it??? just find one already made.

seriesII Mentor

seriesII

Posted
  • Author
Posted
i think he means this one

mwahahahahaha :)

THATS the ONE! , hahah, ive seen that car, thats that 301kw r33 from sydney!!, nice car!!!, damn, yup thats the badge, i sorta dd a search as well, and looks like you might have to buy a alot of them ;(. MUD: thats pritty much what i wanted as well, thanx to all who got up in this, you all think a group buy would be worth something?, maby something like that green gtst... HEY THIZZLE, were did you get that pic from?, i wonder if the guy has a email contact on a site?

thizzle Mentor

thizzle

Posted
Posted (edited)

i got the pics on disc from a photo shoot i did with fast fags lol...

painting a badge red gives a GTR badge impression from a distance same as the GTS-R badges by east bear.. i wanted mine to be obviosly GTS ..its from a mould the exact same shape width depth as a gtr badge the S is a bit thinner...i called up everywhere few shops will do small orders cuz the mould has to be made so its not worth it...

HINT HINT be creative...mine didnt cost a cent...

Edited by thizzle
seriesII Mentor

seriesII

Posted
  • Author
Posted

Thizzle "Mine didnt cost a cent", hey do you have a pic of yours any were at all?, just wanna have a look. LOL At Fast Fags :P

hey Konrad, thanx for that guys page, i'll email and see how he got that done, in liking that green gtst badge tho, thats hot.. and hahah at the holden badge, i think that thing will make a skyline slower :) haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Cas issue

      By joshuaho96 · Posted

      Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • joshuaho96
      Jacks that fit under GTR lips that can reach the subframe?

      By joshuaho96 · Posted

      On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Nice....looking forward to that update
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
×
×
  • Create New...